Optimizing the hydraulic efficiency of submersible drainage pumps (SDPs) is crucial for energy conservation and performance enhancement, especially in emergency applications. Therefore, this study aims to develop an energy-efficient SDP by designing an optimized impeller model using a numerical scheme and introducing a flow balance block (FBB) as an alternative to modifying the pump casing, thereby reducing internal space and improving performance. Experimental validation of the optimized impeller and FBB was conducted by comparing their performance with the original pump model. The results demonstrated that the optimized impeller increased efficiency by 3.35% at a flow rate of 0.195 m3/min, with an overall average efficiency improvement of 2.33%. Additionally, when the optimized impeller and FBB were combined, the pump's efficiency was further enhanced by 5%, and the flow rate increased by approximately 10%. The study also proposed that the tap bolt method is more effective for installing the FBB than the silicone attaching method. This research provides a comprehensive experimental approach to improving SDP efficiency and offers valuable insights for future pump optimization.