Dual-Band and Dual-Polarization CPW Fed MIMO Antenna for Fifth-Generation Mobile Communications Technology at 28 and 38 GHz

Abstract

In this paper, we developed a 2-port dual-band and dual-polarization multiple-input-multipleoutput (MIMO) antenna for fifth-generation (5G) mobile applications at 28 and 38 GHz. The antenna was fabricated using a double-layer Rogers TM RO4003 substrate with a footprint of 3.77 λ 0 × 1.86 λ 0 (λ 0 being the free-space wavelength at 28 GHz). The aperture-coupled patch configuration fed by a coplanar waveguide (CPW) transmission line is adopted as the elementary antenna. The top patch and the coupling aperture are designed to radiate at 38 GHz and 28 GHz respectively for dual-band operation. Further enhancement of the directivity at 28 GHz is achieved through the top patch acting as a parasitic director. A 2-by-4 array antenna for MIMO application was then constructed through physical rotation of the single element at +45 and −45 degrees to create polarization diversities. The 2-port MIMO antenna realized using this configuration demonstrated an impedance bandwidth of S11<−10 dB covering 27. GHz, a gain of greater than 8 dBi, isolation of more than 20 dB and a cross-polarization level of greater than 20 dB. The important MIMO parameters such as ECC, DG, TARC, and MEG have also been characterized and presented.

Four port tri-circular ring MIMO antenna with wide-band characteristics for future 5G and mmWave applications

“…However, the antenna targets the sub-6 GHz frequency band with a narrow impedance bandwidth of 0.2 GHz. A coplanar waveguide (CPW) 1×4 array antenna was presented in [32] . The antenna was developed for 28 GHz and 38 GHz applications.…”

Microstrip patch antennas for various applications: a review

“…Tsao et al [5], developed a 2-port dual-band and dual-polarization multiple input, multiple output (MIMO) antenna for 5G mobile applications at 28 and 38 GHz. Both orthogonal polarization and frequency diversity were features of the MIMO antenna.…”

Development of Two UWB Multiband MIMO Antennas with Enhanced Isolation and Cross-Correlation

“…In order to promote isolation, a decoupling structure is built that isolates the input of the radiating patches from the corresponding network arrangement in [8][9][10][11][12]. To increase the isolation between the patches, parasitic components are utilized in [13][14][15][16][17][18]. Using the literature mentioned above, it is necessary to create a MIMO antenna that operates on a multiband application with an ultra-wide bandwidth, improved TARC, and better cross correlation.…”