Dynamic Analysis of a Fault Planetary Gear System under Nonlinear Parameter Excitation

Abstract

In order to facilitate lubrication and avoid the gear stuck due to thermal expansion, there needs to be a gap between the tooth profiles. As a strong nonlinear factor, the backlash will affect the motion state of the planetary gear system. When the gear failures occur, the motion state of the system will accordingly change. In this study, the meshing stiffness of the gear pair with tooth tip chipping fault is calculated by combining the analytic geometry method and the potential energy method. Then, a new nonlinear dynamic model including tooth backlash, time-varying mesh stiffness, and manufacturing error is established to study the dynamic response of the system. The equations of motion are derived by the Lagrangian method and solved by the numerical integration method. Taking the excitation frequency and tooth backlash as the variation parameters, respectively, the dynamic characteristics of the system are analyzed by comparing the global bifurcation diagrams between the health system and the fault system, and the path of the system into chaos is revealed. At the same time, the local characteristics of the system are revealed through the phase diagrams and Poincaré maps. The results show that with the variation of excitation frequency and tooth backlash, the fault system presents a more complex motion state. This study can provide the theoretical support for dynamic design and fault diagnosis of planetary gear transmission systems under the environment of gear fault-prone.

Mesh Characteristic Analysis of Spiral Bevel Gear Pairs Considering Assembly Errors and Tooth Tip Chipping Faults

“…Li G et al [27] established a lumped parameter dynamic model of planetary gear with tooth tip chipping and derived the analytical equation of tooth tip chipping on composite planetary gears. Han J et al [28] and Liu Y et al [29] combined the analytical geometry method with the potential energy method to analyze the effects of varying degrees of tooth tip chipping. However, it is challenging to analyze the fault of the gears.…”

Dynamic characteristics of single-loop gear system based on bond graph method

“…At present, the research of precise modeling method for complex gear transmission system is still a hot topic [11][12][13]. New modeling methods include graph theory, signal flow diagram and bond graph [14][15][16][17].…”

Research on nonlinear dynamic characteristics of high-speed gear in two-speed transmission system

“…The study of nonlinear characteristics of two-speed transmission system can guide the optimal design and manufacture of transmission system.At present, the friction clutch and the planetary gear transmission system have been widely used, and the research on the nonlinear characteristics of the coupling transmission system between the friction clutch and the planetary gear has been a hotspot. Han4 established a nonlinear dynamics model considering time-varying meshing stiffness, tooth side clearance and static transmission error, and solved it by using numerical integration method, and analyzed the dynamics characteristics of the system through global bifurcation diagram. Li5 studied the meshing characteristics of planetary gear train when the position of the planetary frame changes under variable loads.…”