Dynamic characteristics analysis and  optimization design of two-stage helix planetary reducer for robots

Abstract

The dynamic characteristics of high-precision planetary reducers in terms of vibration response and dynamic transmission error have a significant impact on positioning accuracy and service life. However, the dynamics of high-precision two-stage helical planetary reducers has not been studied extensively enough and needs to be studied in depth. In order to make up for this defect, considering the time-varying meshing stiffness of gears and transmission errors, a translation-torsion coupled dynamics model of a two-stage helical planetary gear drive is established based on the Lagrange equations by using the centralized parameter method for analyzing the dynamic characteristics of the reducer. The differential equations of the system were derived by analyzing the relative displacement relationship between the components. On this basis, a finite element model of a certain type of high-precision reducer was established, and the effects of factors such as rotate speed and load on the dynamic behaviour and transmission accuracy were investigated through simulation and experimental comparison to quantify or characterize their effects.Based on the combined modification method of helix modification with drum shape, the optimized design of this type of reducer is carried out, and the dynamic characteristics of the reducer before and after modification are compared and analyzed. The results show that the adopted modification optimization method is effective in reducing the vibration amplitude and transmission error amplitude of the reducer.The peak-to-peak value of transmission error of the reducer is reduced by 19.87%; the peak value of vibration acceleration is reduced by 14.29%; and the RMS value is reduced by 21.05% under the input speed of 500 r/min and the load of 50 N·m operating conditions. The research results can provide a theoretical basis for the study of dynamic characteristics, fault diagnosis, optimization of meshing parameters and structural optimization of planetary reducers.