Dynamic Response Analysis of an Offshore Converter Platform with Valve Towers under Seismic Excitation

Abstract

Converter valves are the core equipment of offshore wind power structures. However, they are highly vulnerable to vibration under strong earthquakes, which will affect normal operation of the offshore wind farm. Converter station is an axisymmetric structure with obvious asymmetry in its internal configuration of the superstructure. This study aimed to analyze the dynamic response of a supported converter valve in an offshore converter station under seismic excitation. The coupling model of the supported valve tower group and the converter station were established, and the distribution law of the valve tower dynamic response and foundation settlement were investigated. The dynamic response effect of the modal truncation, valve tower stiffness, and basic size on different areas and foundations of the valve towers were studied. The findings were as follows: (i) the effect of local vibration of the valve tower should not be simplified by using equivalent mass and node condensation; (ii) the structure–equipment coupling analysis method should be used to review the structural design scheme of the offshore converter station in the intensity VII region; (iii) the vertical higher-order modes should be considered during the vibration response calculation and its participation ratio in mass should not be lower than 90%; (iv) the frequency range that minimizes the vibration response is the characteristic frequency range of horizontal vibration, while the best vibration suppression effect cannot be obtained in both the horizontal and vertical directions; and (v) the stiffness of the valve tower itself should be adjusted and different stiffness designs of the valve tower in different positions should be adopted to realize effective vibration response control.

Analysis of the Seismic Performance of ±500 kV Flexible DC Converter Valves

“…Liu et al [13] firstly established the ideal and improved valve structures and then calculated the dynamic characteristics of the two valve structures to study their structural response under horizontal and vertical excitation. Lan et al [14,15] propose a simplified calculation model for the platform and converter valve to evaluate the impact of platform mass and stiffness on the dynamic response of the converter valve under wave and earthquake actions. Sun Z.-Z.…”