Editorial

Abstract

This issue contains two briefings and three papers mostly focusing on the theme of sustainable construction materials. The first briefing paper by Badjatya et al. (2015) explores the possibility of replacing 100% potable water in cement concrete with textile dye waste water; a win-win scenario for both the concrete industry as well as the textile industry if the proposed solution actually works. This briefing paper is quite timely in addressing an important and multi-faceted sustainability issue: the amount of potable water available is fast depleting due to pollution of various water bodies; treating wastewater resulting from textile dyeing processes is not easy and has several environmental problems; the amount of potable water used in the production of concrete is quite significant. The preliminary study by Badjatya et al. (2015) concludes that the fresh and hardened properties of concrete made using potable water and textile dye wastewater are quite comparable, holding promise for future research.Continuing with the sustainability theme, the second briefing paper by Senthil Kumar and Baskar (2015) presents results from an experimental investigation on the shear strength of concrete prepared with electronic waste (E-waste) as coarse aggregate. It is unfortunate that imported E-waste plastics are still being disposed of as landfill or incinerated in most developing countries due to a lack of adequate infrastructure to efficiently recycle and beneficially reuse them. Studies in the past have proposed the idea of using E-waste plastics, such as high-impact polystyrene (HIPS), acrylonitrile butadiene styrene and printed circuit boards, as partial replacement for aggregate in asphalt as well as cement mortar and concrete (Baron Colbert and You, 2012;Wang and Meyer, 2012). Building upon their own previous research on incorporating E-waste plastic as a coarse aggregate in concrete, Senthil Kumar and Baskar (2015) focus on the shear strength of concrete containing HIPS from computers and accessories as a partial replacement for coarse aggregate. The researchers conclude that the shear strength decreased with increase of HIPS aggregate and therefore they recommend the use of HIPSmodified concrete for use in non-structural elements.The first paper by Sharma et al. (2015) presents a state-of-the-art review on engineered bamboo and its use in structural applications. Interest in the use of bamboo as a structural and construction material continues to grow in light of the environmental concerns associated with the utilization of rapidly depleting, non-renewable resources for construction of civil infrastructure. Despite its rapid growth and beneficial strength characteristics, the authors note that the use of bamboo as a construction material has been limited, mainly due to the inherent variability in its geometric and mechanical properties as well as lack of standardization. Engineered bamboo products aim to overcome these limitations. Their review focusses on two types of engineered bamboo, namely the bamboo scrimber and...