Effect of Abnormal Grains on the Mechanical Properties of FGH96 Solid-State Diffusion Bonding Joint

Abstract

The hollow twin-web disk is designed to improve the thrust-to-weight ratio of the aero engine, where the welding joint microstructures determine the disk’s mechanical properties. This study aimed to elucidate the effect of abnormal grains formed in the welding region on the mechanical properties of FGH96 solid-state diffusion bonding joints. Digital image correlation using images captured by scanning electron microscopy (SEM-DIC) and electron backscattering diffraction (EBSD) technologies were applied. The results show that abnormally large grains (2.5 times that of the matrix), with preferred orientation in the bonding region, were detrimental to the joint mechanical properties. The yield and tensile strengths were 995.85 MPa and 1456.67 MPa, respectively, and the corresponding relative (ratio to the matrix) ones were 92.54% and 88.81%. After modifying the bonding process, the grain size in the bonding region was tailored to close to that of the matrix, and considerable twin boundaries (TBs) formed, leading to the relative tensile and yield strength reaching 98.86% and 99.37%. Furthermore, the failure mode changed to intragranular type from intergranular type. It demonstrates that tailoring the newborn grain size, introducing TBs inside, and eliminating preferred orientation during the welding process can be an efficient way to improve the joint mechanical properties.

Phase-field modeling of stored-energy-driven grain growth with intra-granular variation in dislocation density

“…This phenomenon is referred to as abnormal grain growth (AGG). While AGG can be detrimental to materials properties in some situations [4,5], it has been found to be useful in some applications, such as the fabrication of large-grained Fe-Si electrical steels with low core loss [6] and superior magnetic properties [7], and the production of Fe-based shape memory alloys with superior pseudoelastic properties [8]. Therefore, many studies have been conducted to identify its origin.…”