Effect of Carbon Fibre Reinforced Polymer Strengthening on Axial Capacity and Ductility of Non-slender Square Concrete Columns

Abstract

This research investigated the effect of Carbon Fibre Reinforced Polymer (CFRP) strengthening on the axial capacity and ductility of non-slender square concrete columns. There was a problem of buildings collapsing in Kenya. Retrofitting of the buildings vulnerable to collapse was of great importance to ensure the safety of the occupants and to address the housing deficit in the country. An experimental research programme was conducted on 90 non-slender square concrete columns to find out the gain in axial capacity and ductility of the columns strengthened by CFRP. The specimens (150mm x 150mm x 350mm) were made of plain and reinforced concrete. Three different concrete grades: C8/10, C12/15 and C16/20 were used. The specimen had varying configurations of CFRP wrap: partial and full confinement in one and two layers. Four parameters were investigated in this study: concrete grade, steel reinforcement, degree of confinement and the number of layers of CFRP wrap. The specimens were subjected to uniaxial compression up to failure, and the stress-strain curves were plotted. This study found that weaker concrete grades experienced the highest effect due to CFRP strengthening. Presence of reinforcement had a significant effect on the axial capacity and ductility of columns without CFRP strengthening. On the contrary, the presence of steel reinforcement reduced the effectiveness of CFRP strengthening. Partial CFRP confinement offered better material efficiency as compared to full CFRP confinement, and the number of layers had a direct relationship with the increase in strength and ductility.