Purpose
This study aims to investigate the erosion wear rate of a stainless steel automobile exhaust manifold, both computationally and physically.
Design/methodology/approach
The experiment was performed on a motorcycle exhaust manifold as well as on a 3D model, created using SolidWorks 2022 CAD software. The analysis was later achieved using ANSYS 19.2 simulation software using Fluent – code.
Findings
The analysis of solid particle erosion in the exhaust manifold revealed that erosion wear is concentrated predominantly at the extrados of the manifold, with the most significant wear occurring at the lowermost bend. The erosion wear rate increases with larger particulate sizes and varies among bends, with negligible wear observed in straight pipes. The SEM analysis further confirmed surface degradation, with rugged textures, pits and grooves indicating abrasive wear. Spine-like structures and fractured soot particles suggest erosive and abrasive forces caused by high-speed contact of exhaust gas compounds. Energy dispersive X-ray spectroscopy revealed significant carbon abundance, indicating carbonaceous compounds from fuel combustion, along with notable amounts of oxygen and iron, typical of oxidized metallic constituents. The discrete phase modeling (DPM) analysis highlighted peak particulate matter deposition at the first bend exit, with maximum concentrations observed at specific angles. This deposition is influenced by centrifugal force, leading to increased PM concentration at outer bend walls. Velocity magnitude contours showed asymmetrical flow profiles, with high turbulence levels and secondary flow induced by centrifugal effects in bend areas. Dynamic pressure contours revealed varying pressures at intrados and extrados, with maximum pressure observed at the intrados of the manifold’s bends. These findings provide valuable insights into erosion wear, particulate dispersion and flow dynamics within the exhaust manifold.
Originality/value
The study investigated an automobile exhaust manifold model using ANSYS Fluent code and DPM to analyze erosion wear rate phenomena and its various constituents. This analysis was conducted in comparison with a physically eroded sample. The study offers insights into the mechanism underlying the exhaust manifold of an automobile.
