Effect of Heat Input on Microstructure and Corrosion Resistance of CP-Ti Laser Beam Welded Joints

Abstract

The TA1 welded joints with different heat inputs were obtained by a fiber laser and their microstructure, mechanical properties and corrosion resistance in simulated saliva solution were studied. The results show that the microstructure in fusion zone (FZ) is needle-like α’ martensite and lath-shape α’ martensite, and that of the heat-affected zone (HAZ) is zigzag α phase. With the increase of heat input, the volume fraction of needle-like α’ martensite decrease and the microstructure is coarsened in FZ, but there is almost no change in the microstructure of the HAZ. The order of the corrosion resistance of welded joints with different heat inputs is the same as FZ > HAZ > base material (BM), and the heat input has a more influence on the corrosion resistance of FZ. The binary multiple linear regression relationship between the corrosion current density/charge transfer resistance and the length/width of α’ martensite was established, indicating that the width of α’ martensite is the main factor affecting the corrosion resistance.