Effect of Particle Strength on SiCp/Al Composite Properties with Network Architecture Design

Abstract

Recent works have experimentally proven that metal matrix composites (MMCs) with network architecture present improved strength–ductility match. It is envisaged that the performance of architecturally designed composites is particularly sensitive to reinforcement strength. Here, reinforcing particles with various fracture strengths were introduced in numerical models of composites with network particle distribution. The results revealed that a low particle strength (1 GPa) led to early-stage failure and brittle fracture. Nevertheless, a high particle strength (5 GPa) delayed the failure behavior and led to ductile fracture at the SiC/Al–Al macro-interface areas. Therefore, the ultimate tensile strengths (UTS) of the network SiC/Al composites increased from 290 to 385 MPa, with rising particle strength from 1 to 5 GPa. Based on the composite property, different particle fracture threshold strengths existed for homogeneous (~2.7 GPa) and network (~3.7 GPa) composites. The higher threshold strength in network composites was related to the increased stress concentration induced by network architecture. Unfortunately, the real fracture strength of the commercial SiC particle is 1–2 GPa, implying that it is possible to select a high-strength particle necessary for efficient network architecture design.