Effect of Rapid Solidification Processing on the Microstructure and Corrosion of 316L Austenitic Stainless Steel

Abstract

Austenitic stainless steels processed by rolling are widespread in technological applications, since they have excellent mechanical and corrosion properties. This study investigated the effect of the cooling rate, microstructure and properties of 316L austenitic stainless steel under cold rolled conditions and by rapid solidification. The microstructure of the cold rolling processing steel was composed of austenite and a low percentage of delta ferrite. For the rapid solidification condition, the microstructure evolved from columnar and acicular dendrites to equiaxed dendrites with decreasing cooling rates, without the presence of delta ferrite due to the high cooling rate. Furthermore, thermal analyses in both routes revealed that oxidation kinetics was slower after rapid solidification in synthetic air. The microhardness in the cold rolling condition was lower than in the rapid solidification condition since the microstructure under the solidification condition is more refined. The sample in the rapid solidification condition region RS1 presented the highest corrosion resistance considering the pit potential. The passivation current density in the cold rolled condition was 5.72x10 -5 A/cm 2 , while under the rapid solidification condition, regions RS1 and RS2 were 2.24x10 -5 A/cm 2 and 3.72x10 -6 A/cm 2 , respectively, and region RS3, did not present a passivation region in a broad range of potentials.

Effect of Ni element on microstructure and properties of cold-rolled 316 L austenitic stainless steel

“…Cold rolling technology for 316 L stainless steel yields thin to ultra-thin sheets with superior surface formability. Abundant research in this realm delves into the deformation structure and microstructural evolution kinetics of coldrolled stainless steel [13][14][15][16], processes of recrystallization and crystallization orientation (texture) evolution [17][18][19][20], augmentation of strength-plasticity synergy [21], and modifications in corrosion resistance [22]. Beyond the rolling process, diverse rolling methods profoundly impact the microstructure and mechanical characteristics of 316 L stainless steel.…”

Uniform Droplet Spraying of Magnesium Alloys: Modeling of Apollonian Fractal Structures on Micrograph Sections

“…In the rapid solidification of metals and alloys, the chaotic RSP evolution is often attributed to its nonlinear dynamics, in which random spatio-temporal variations in its initial and/or boundary conditions grow unstably to dominate the microstructural responses [13,14]. Chaos phenomena originate from the non-unique, probabilistic nature of impulsive, local nucleation by heterogeneous (or, rarely, homogeneous) mechanisms, as well as arm fragmentation of dendritic structures, out of which subsequent grain growth ensues.…”