Effect of the manufacturing process on the equivalency qualification of glass fiber reinforced polymer

Abstract

Glass Fiber Reinforced Polymer (GFRP) is widely used as aerospace material requiring high specific strength, specific stiffness, and excellent mechanical and chemical properties. To apply the already approved composite materials to other processes, an equivalency test that compares the mechanical properties of the composite materials based on the database is required. For the successful completion of the equivalency test, it is important to control the factors affecting the mechanical properties. The resin content and density of the specimens are manufactured differently according to the process. The effect of these factors on the change of mechanical properties required for equivalency qualification has not been sufficiently reported. In this study, an equivalency test was performed on the GFRP applied to the aircraft radome based on the procedure of the equivalency test and acceptance test proposed by the National Center for Advanced Materials Performance. The causes of problems occurring between equivalency tests were analyzed. It was confirmed that the resin content, density, and voids of the specimen affect the mechanical properties. As the resin content decreases, the density and voids were controlled, and it was confirmed that the average strength and modulus increase by 13.12 and 6.78%, respectively. The equivalency qualification was completed by applying an improved process in which these factors were controlled.