Effect on Rheological Properties and 3D Printability of Biphasic Calcium Phosphate Microporous Particles in Hydrocolloid-Based Hydrogels

Abstract

The production of patient-specific bone substitutes with an exact fit through 3D printing is emerging as an alternative to autologous bone grafting. To the success of tissue regeneration, the material characteristics such as porosity, stiffness, and surface topography have a strong influence on the cell–material interaction and require significant attention. Printing a soft hydrocolloid-based hydrogel reinforced with irregularly-shaped microporous biphasic calcium phosphate (BCP) particles (150–500 µm) is an alternative strategy for the acquisition of a complex network with good mechanical properties that could fulfill the needs of cell proliferation and regeneration. Three well-known hydrocolloids (sodium alginate, xanthan gum, and gelatin) have been combined with BCP particles to generate stable, homogenous, and printable solid dispersions. Through rheological assessment, it was determined that the crosslinking time, printing process parameters (infill density percentage and infill pattern), as well as BCP particle size and concentration all influence the stiffness of the printed matrices. Additionally, the swelling behavior on fresh and dehydrated 3D-printed structures was investigated, where it was observed that the BCP particle characteristics influenced the constructs’ water absorption, particle diffusion out of the matrix and degradability.

Self‐healing mineralized hydrogel scaffolds for stretch‐triggered dye release

“…LVER indicates the range in which an oscillatory rheology test can be performed without destroying the structure of the sample, 16 which means that in the LVER region, the G' and G" are parallel to each other and are independent to the applied strain. As soon as the G' and G" crosses each other the hydrogel starts to behave like a liquid material.…”

Materials and Methods for All-Cellulose 3D Printing in Sustainable Additive Manufacturing

“…With cellulose-based feedstocks, 3D printing proceeds via the creation of solutions, suspensions, and pastes with carefully controlled rheological properties to enable material extrusion. The shear thinning (specifically, thixotropic) behavior of these cellulosebased materials, and bioinks in general, as they are extruded and subsequently solidified, is of particular importance [51][52][53]. As material is extruded from a nozzle during 3D printing, it experiences a shear stress determined by nozzle size, printing pressure, and the viscosity of the printing feedstock [54].…”

Tunable metallo-hydrogels: Mechanical properties and characterization of stimuli responsive self-assembling peptide hydrogels

“…The extent of thixotropy is intricately linked to both the duration of applied shear stress, and the magnitude of the shear rate. 75 Both metallo-hydrogels and non-metallo-hydrogels exhibit remarkable thixotropic properties based on observations of their rapid recovery to the gel-like state. Upon the stopping of the shear force, the storage modulus (G′) of the P2 hydrogel swiftly increased by more than three orders of magnitude within a few seconds.…”