Effects of calcium amendments on hydraulic conductivity and sodium content of brine‐impacted soils

Abstract

High concentrations of sodium chloride dominate oilfield produced waters (brine) of the Williston Basin. When accidental spills of produced waters occur, there is an immediate need to reduce concentrations of chloride, to protect surface and groundwater systems and to reduce concentrations of sodium (Na) in soil to prevent any unwanted swelling and dispersion in soil. Swelling and dispersion of soils will likely occur if sodium adsorption ratio values are too high and the electrical conductivity drops below a certain threshold that is required to maintain flocculation. To prevent this, a calcium (Ca) amendment can be applied to replace Na with Ca on soil exchange sites. Historically, gypsum has been the most common Ca amendment used for improving brine impacted soils. Flue gas desulfurization gypsum is available in North Dakota but is still a sparingly soluble amendment. The purpose of this research was to investigate the use of calcium acetate (Ca‐Ac) as an amendment for brine‐impacted soils as compared to gypsum. Ca‐Ac has a similar concentration of Ca compared to gypsum but is over 100 times more soluble than gypsum. This laboratory experiment will compare how varying levels of gypsum and Ca‐Ac can influence soil hydraulic conductivity, and chemical and physical properties when mixed with oilfield brine‐impacted soils.