Effects of Chemical Compositions and Cetane Number of Fischer–Tropsch Fuels on Diesel Engine Performance

Abstract

Fischer–Tropsch synthetic (FT) fuels are expected to be an ideal alternative for diesel fuel to achieve higher thermal efficiency and reduction in exhaust emissions because of their characteristics of being aromatic-free, sulfur-free, and high cetane number. In this study, the effects of chemical compositions and cetane number of FT fuels on diesel engine performance were investigated by using a commercial GTL (Gas-to-Liquids) diesel fuel synthesized by the FT method and blended paraffinic hydrocarbon fuels made to simulate FT fuels with different chemical compositions and cetane numbers. At first, a commercial diesel fuel (JIS No.2) and GTL were examined by varying the intake oxygen concentrations with cooled EGR. Compared with diesel fuel, GTL shows shorter premixed combustion, smaller heat release peak, and longer diffusion combustion duration at both high and medium conditions due to the higher cetane number. Further, by using the GTL, a limited improvement in thermal efficiency and exhaust emission reduction of NOx have been obtained, but no significant reduction in the smoke emissions is achieved, even though FT fuels have been considered smokeless due to their aromatic-free characteristics. Next, three types of paraffinic hydrocarbon fuels with cetane numbers of 78, 57, and 38 were blended as simulated FT fuels and were examined under the same experimental apparatus and operation conditions. For the low cetane number simulated FT fuel (cetane number 38 fuel), the results show that the ignition delay and premixing period are significantly longer at low intake oxygen concentration conditions, meaning that the premixing of low cetane number fuel is more sufficient than other fuels, especially under the high EGR rate conditions, resulting in fewer smoke emissions. Furthermore, with CN38 fuel, an excellent indicated thermal efficiency was obtained at the high load condition. To summarize the results, the low cetane number FT fuel shows a potential to achieve higher thermal efficiency and reduction in exhaust emissions on commercial diesel engines with EGR.

Numerical Study for the Design of a Thermal Energy Storage System with Multiple Tunnels Based on Phase Change Material: Case Study Mining in Chile (Thermal Storage in Off-Grid Industrial Applications)

“…Furthermore, it allows the storage capacity to be varied according to the application requirements. In this case, 43 pipes with a nominal diameter of 2 1 2 SCH 80 (0.0635 [m]) and a height equal to the thermocline were selected and distributed, as specified in Figure 9. Each pipe is assigned a surrounding material of 90 [mm] diameter.…”

“…Currently, several systems and processes require electricity 24 h a day all week and are supplied with energy through diesel or conventional generators [1,2], specifically when these systems are off-grid. Power generation using conventional technologies involves fossil fuel transport logistics, potential spills, on-site operators, ongoing maintenance, and high CO 2 emissions [3].…”

A Feedforward Model Predictive Controller for Optimal Hydrocracker Operation

“…Using a single quality indicator for diesel (T95) is enough as an output since the products are already fractionated, hence limited in their carbon number. Diesel fuel usually contains hydrocarbons in a range of 10-25 carbon species [18]. Unlike the single-point product quality indicator, the feed quality is represented using more points on the feed TBP curve for better control decisions as the feed has a greater carbon number range.…”

Influence of hydrogenated diesel/H2O2 blend fuel on diesel engine performance and exhaust emission characterization

“…The critical property of diesel fuel is its cetane number which affects ignition delay to combustion [13][14][15] . Fuel containing a higher cetane number enhances the combustion process during operation 16 . Yet, increasing concern over environmental protection and rigorous governmental regulations on exhaust emissions to reduce pollution has sparked a significant increase in engine development research 17 .…”