Co-free, nickel-rich layered materials are crucial for the cost reduction of lithium ion batteries to meet the requirement of the electric vehicle market. However, the strategies to synthesize the practically applicable Co-free, nickel-rich materials are still challenging. Herein, we report a strategy for fabrication of the materials by Sn modification of LiNiO 2 . Under high temperature conditions, bulk doping of the Sn 4+ ions and surface coating of Li 2 SnO 3 can be simultaneously achieved. Due to the presence of the strong Sn−O bond and chemically inert property of the coating layer, the structure reversibility, integrity of the secondary particles, and interfacial stability of the Sn-modified materials during charge/discharge cycling can be greatly enhanced relative to those of the counterpart pristine LiNiO 2 . The optimized material, LiNi 0.97 Sn 0.03 O 2 , can deliver a discharge capacity of 216.76 mAh g −1 at 0.1 C with a capacity retention of 80.61% after 250 cycles at 0.5 C. In addition, the enlargement of the crystal lattice by Sn doping is also beneficial to the rate capability of the materials, providing a discharge capacity of 148.06 mAh g −1 at 5 C. Thus, the simultaneous dual functionalization of Sn to LiNiO 2 could be a practicable approach to gaining the Co-free, nickel-rich materials.