Effects of pre-treatments on drying kinetics and energy consumption, heat-mass transfer coefficients, micro-structure of jujube (Zizyphus jujuba L.) fruit

Abstract

In this study, jujube fruits were investigated effects on drying kinetics and energy consumption (total-specific), heat-mass transfer coefficients, micro-structure of pre-treatments 2% ethyl oleate, 540 W microwave and freeze-thaw + 720 W microwave. Initial moisture of fruit from 0.75 ± 0.2 g (water).g -1 (dry matter) to 0.15 ± 0.1 g (water).g -1 (dry matter). The shortest drying durations were observed in 2% ethyl oleate pre-treated samples. The greatest total power consumption (1.502 kW) was observed in control samples The greatest specific energy consumption (158.98 kW.kg -1 ) was observed in freeze-thaw pre-treated samples. The effective diffusion values varied between 9.53 x 10 -8 -5.26 x 10 -8 m 2 .s -1 . Lewis and Jena-Das models the best estimated time-dependent moisture ratios in freeze-thaw pre-treated samples. The average speed values was determined between 0.0025-0.0005 (gr db.minute -1 ) at the beginning of the drying and decreased to about 0.0005 (gr db.minute -1 ) at the lasting of the drying. The largest mass transfer coefficient value was found depending on the time varied between 1.035 x 10 -7 -8.256 x 10 -12 m.s -1 . in the samples dried by dipping into a 2% ethyl oleate solution. The average heat transfer coefficient value is calculated 0.204 W.m 2 °C-1 . With regard to micro-structure of the dried samples, 2% ethyl oleate pre-treatments yielded the least deformations and had the closest structure to fresh samples.

Sea Buckthorn Pretreatment, Drying, and Processing of High-Quality Products: Current Status and Trends

“…Physical pretreatment is mainly divided into thermal and non-thermal treatments. They include microwave, blanching, ultrasonic, steam blasting, and pulsed electric field [67][68][69]. Physical pretreatment methods for sea buckthorn currently include blanching, piercing, ultrasonic waves, etc.…”