Effects of starting cobalt salt upon the cobalt-alumina interactions and hydrodesulfurization activity of CoO/Al2O3

Influence of the Support Treatment on the Behavior of MnOx/Al2O3 Catalysts used in VOC Combustion

“…5 [23]. Figure 5 shows Mn2p3/2 XPS peak of catalysts with low manganese loading instead of those with higher manganese loading because the sensitivity of the measurement of electron binding energy shift related to surface interactions is decreased with increasing loading [24]. The binding energy of the Mn2p3/2 of catalyst from the untreated support is lower than those observed for the treated supported catalysts.…”

Surface and Texture Characterization of Alumina-Supported Manganese Oxide Catalysts and Their Formate Precursors

“…In the last decade metal acetate solutions are often used for the preparation of catalysts by pore volume impregnation of ␥-Al 2 O 3 instead of traditional metal nitrate solutions (1)(2)(3)(4)(5). The advantage of the acetate precursors is the high dispersion of the oxide phases formed and their homogeneous distribution throughout the alumina particles.…”

Chromatographic effect during the preparation of γ-Al2O3 supported Cu−Mn catalysts

“…Cu-Mn formates have been used as precursors for the following reasons: Recently, it has been shown [2][3][4] that the use of Mn and Co acetates as precursors (instead of nitrates) results in a highly dispersed oxidic phase homogeneously distributed throughout the l'-AlzO3 particles. Further, it might be expected that the thermal decomposition of mixed crystals as precursors would lead to the formation of supported mixed oxides with high dispersion and catalytic activity.…”