Efficient Generation of Plasma‐Activated Aerosols with High Concentrations of Reactive Species via Silicon Dioxide Coated Surface Acoustic Wave Devices

Abstract

An effective method to deliver plasma‐activated water onto contaminated surfaces is with a surface acoustic wave (SAW) nebulizer that can efficiently produce plasma‐activated aerosols. While higher reactive species concentrations in the plasma‐activated aerosols promote more efficient bacterial inactivation and hence reduce the amount of aerosols needed to completely eradicate the bacteria colonies, higher concentrations of reactive species themselves are found to lead to lower nebulization rates due to the increased electrical conductivity of the solution. To circumvent this problem, it is shown that coating the SAW substrate with a thin insulating layer of silicon dioxide (SiO2) can significantly mitigate the nebulization rate reduction. Specifically, when the electrical conductivity increases from 0.25 to 4.0 mS cm−1, the 62% drop in the nebulization rate is observed with the uncoated SAW devices is substantially reduced to 19% simply with the SiO2 coating. This can be attributed to the synergistic effects of increased wettability and the suppression of the electrical body force acting on the liquid film. The concomitant increase in the bacterial colony reduction from 17% to 76% demonstrates this solution to be a facile yet effective way of enhancing the efficiency for spray‐based bacterial inactivation on contaminated surfaces.

A rapid prototyped atmospheric non-thermal plasma-activated aerosol device and anti-bacterial characterisation

“…This study investigated a rapid-prototyped plasma-activated aerosols (PAA) setup for its chemical and anti-bacterial properties. In contrast to other studies ( Wong et al, 2020 ; Chew et al, 2022 ; Woo et al, 2023 ; Chew et al, 2024 ), this study reports on the direct production of PAAs and the chemical changes induced to aerosols without the prior generation of plasma-activated water. Further to other studies ( Freyssenet and Karlen, 2019 ; Song et al, 2020 ; Song and Fan, 2020 ; Fan et al, 2022 ), this study does not include the addition of hydrogen peroxide to induce anti-microbial effects.…”