Einfluss von Chlorid und Elektrolytstabilität auf die Bildung von Passivierungsschichten an der Negativen Elektrode von Mg Batterien: eine operando EQCM‐D Studie

Abstract

Rechargeable magnesium batteries are promising for future energy storage. However, among other challenges, their practical application is hindered by low coulombic efficiencies of magnesium plating and stripping. Fundamental processes such as the formation, structure, and stability of passivation layers and the influence of different electrolyte components on them are still not fully understood. In this work, we gain unique insights into the initial Mg plating and stripping cycles by comparing Mg bis(trifluoromethanesulfonyl)imide (Mg(TFSI)2)‐ and Mg tetrakis(hexafluoroisopropyloxy)borate (Mg[B(hfip)4]2)‐based electrolytes, each with and without MgCl2, on gold electrodes by highly sensitive operando electrochemical quartz crystal microbalance with dissipation monitoring (EQCM‐D) applying hydrodynamic spectroscopy. With the stable Mg[B(hfip)4]2‐based electrolytes, highly efficient and interphase‐free cycling is possible and passivation layers are attributed to electrolyte contaminants. These are forming and degrading during the so‐called initial conditioning process. With the more reactive Mg(TFSI)2‐based electrolyte, thick passivation layers with small pores are growing during cycling. We demonstrate that the addition of chloride lowers the amount of passivated Mg deposits in these electrolytes and accelerates the currentless dissolution of the passivation layer. This has a positive effect since we observe the most efficient cycling and uniform deposition when no interphase is present on the electrode.