Elastic–plastic behavior of a semicircular frame being pressed against a rigid plane

Abstract

As a simplified structural model, a semicircular frame is used to study the crashworthiness behavior of an aircraft fuselage. The quasi-static large elastic-plastic deformation of a semicircular frame in the process of its being pressed against a rigid ground is analyzed. First, based on the linear elastic assumption, the quasi-static large deformation contact process of the frame can be divided into three phases, i.e., point contact, line contact and post-buckling. By means of a shooting method, the relations between the displacement and contact force as well as the distribution of bending moment in the three phases are obtained. Then, by assuming an elastic, perfectly-plastic moment-curvature relationship for the semi-circular frame, the contact process is analyzed in detail to reveal the plastic collapse mechanism, the traveling of plastic hinge and the force-displacement relationship. In order to verify the analysis, a preliminary experiment was conducted, in which two types of half rings with clamped ends were pressed by a rigid plate. In addition, a numerical simulation is also conducted by employing ABAQUS to analyze both rectangular cross-sectional beam and I-beam. Finally, the theoretical predictions are compared with the experimental results and numerical solutions, showing that the elastic-plastic analysis can predict the contact process very well.