Electrical actuation and readout in a nanoelectromechanical resonator based on a laterally suspended zinc oxide nanowire

Abstract

In this paper, we present experimental results describing enhanced readout of the vibratory response of a doubly clamped zinc oxide (ZnO) nanowire employing a purely electrical actuation and detection scheme. The measured response suggests that the piezoelectric and semiconducting properties of ZnO effectively enhance the motional current for electromechanical transduction. For a doubly clamped ZnO nanowire resonator with radius ~10 nm and length ~1.91 µm, a resonant frequency around 21.4 MHz is observed with a quality factor (Q) of ~358 in vacuum. A comparison with the Q obtained in air (~242) shows that these nano-scale devices may be operated in fluid as viscous damping is less significant at these length scales. Additionally, the suspended nanowire bridges show field effect transistor (FET) characteristics when the underlying silicon substrate is used as a gate electrode or using a lithographically patterned in-plane gate electrode. Moreover, the Young's modulus of ZnO nanowires is extracted from a static bending test performed on a nanowire cantilever using an AFM and the value is compared to that obtained from resonant frequency measurements of electrically addressed clamped–clamped beam nanowire resonators.

Tunable Micro- and Nanomechanical Resonators

“…The resonant frequency changes should be determined by variations of geometrical variables and mechanical properties of the resonators [ 107 ]. Many materials and nanostructures such as SiC [ 1 ], carbon nanotubes [ 31 ] silicon [ 32 , 108 , 109 ], graphene [ 110 ], Pt [ 111 ], GaN [ 112 ], rhodium [ 113 ] and ZnO [ 114 ] were widely used for resonator applications. Micro- and nanomechanical resonators based on the materials, including SiC and group III-nitrides [ 115 ], carbon nanotube [ 54 ], and graphene sheet [ 2 , 52 ], have been recently reviewed.…”

Silicon Nanowires for Biosensing, Energy Storage, and Conversion

“…There have been dramatic developments in electrochemical biosensing in the past decade, with applications in medical diagnosis,20 chemical analysis,73 environmental monitoring,74 and public safety 75. Many nanomaterials, such as carbon nanotubes,76–78 quantum dots,79, 80 and semiconductor oxide NWs81–83 have been studied for electrochemical sensing. Among them, SiNWs with their tunable morphology, structure, and electrical properties, combined with tailorable surface functionalization, provide a potentially powerful approach to biosensing and biomedical studies.…”

High Performance, Low Cost Electromechanical Systems Based on Electrostatically Actuated TiS2 Belts

“…The smaller size of nanoelectromechanical resonators enable the fabrication of sensors with molecular mass sensitivities and the possibility of integration that combines arrays of nano‐resonators as well as lowering the power consumption for individual devices . Although going to a smaller size includes complex and expensive fabrication steps for conventional materials; for 2D layered materials, by simple exfoliation techniques, it is possible to go all the way down to atomic scale along with atomically perfect surface …”