Electrical‐thermal behaviors of a cylindrical graphite‐NCA Li‐ion battery responding to external short circuit operation

Abstract

Summary Large amount of heat generated during an external short circuit (ESC) process may cause battery safety events. An experimental platform is established to explore the battery electrothermal characteristics during ESC faults. For 18650‐type nickel cobalt aluminum (NCA) batteries, ESC fault tests of different initial state of charge (SOC) values, different external resistances, or different ambient temperatures are carried out. The test case of a smaller external resistance is characterized by a shorter ESC duration with a faster cell temperature rise, whereas the case of a larger external resistance will last for a longer duration, discharge more electricity, and terminate in a slightly higher temperature. The tested batteries of high initial SOCs generally have higher temperature rise rates, smoother changes at the output current/voltage curves, but a smaller discharged capacity. The batteries of low initial SOCs can be overdischarged by the ESC operations. At low temperatures, say 0°C, the ESC process outputs much less electricity than the process at high temperatures, eg, 30°C. The initial low temperature has little effect on reducing the battery overheat due to ESC operations. The battery thermal behavior is of hysteresis property; analysis of heat generations reveals the subsequent increase of battery surface temperature after the completion of ESC discharge is due to the battery material abusive reaction heats. It is found from analytical and numerical analyses that there can have approximately 30°C temperature difference between the battery core and its surface during ESC operations. The interruption of ESC operation is very probably caused by the high battery core temperature, which leads to the destruction of solid‐electrolyte interface (SEI) film.

Experimental investigation on the essential cause of the degrading performances for an overcharging ternary battery

“…Hence, from the safety perspective, failures and accidents of ternary power batteries can frequently be reported, especially under abuse conditions consisting of overheating, mechanical collision, overcharge, and overdischarge . Within, overcharge, mainly induced by the failure of battery management system, inappropriate operation of batteries, and inconsistency of cells, is the most common trigger for power batteries failure, which would further lead to catastrophic consequences due to the eventual excessive energy input to the power battery system . Thus, it is significant and urgent to investigate the thermal‐electrical characteristics and its related issues of ternary batteries with overcharge abuse in order to improve the lifespan, safety performance, and even promotion in large‐scale applications.…”

Thermal runaway behavior and features of LiFePO 4 /graphite aged batteries under overcharge

“…Echelon utilization is an effective way to deal with the retired batteries since it is simpler, more economical and more environmentally friendly than the chemical recycling process . Safety is the key to the reuse of retired batteries, because the organic solvents in batteries are combustible substances, which can easily lead to battery thermal runaway under various abusive conditions . Although the safety management of battery is improving continuously, battery safety accidents are reported constantly.…”

Risk evaluation of internal short circuit for lithium‐ion battery based on an active protection method

“…The lithium‐ion battery is widely used in electrical vehicle (EV) and energy storage because of its good performance in cycle life, specific energy, and theoretical capacity. However, thermal safety issues have attracted more and more attention 1,2 . Internal short circuit (ISC) can cause thermal runaway and even lead to catastrophic.…”