Electrochemical Oxidation of Two Phenolic Compounds: Evaluation of Kinetics and Energy Consumption

Abstract

Bisphenol A (BPA) and p-cresol are two phenolic compounds present in industrial wastewater and they are harmful to the environment. Electrochemical oxidation is a technology that has the ease of coupling to other treatment systems and is environmentally friendly. In this study, electrochemical oxidation of 100 mg/L of BPA and 50 mg/L of p-cresol were tasted using Boron Doped diamond (BDD) anodes. The results aim that the pseudo-first order kinetic constants (k) had the same order of magnitude for both compounds. Slightly higher values of k were obtained when using a J of 250 A/m2 than other conditions, removing the pollutants in less than 120 min; while the mineralization was completed around 240 and 210 min, respectively. To compare the energy consumption, the parameter Electrical Energy per Order was used, obtaining that to eliminate 90% of the compounds it is required between 6-8 kW·h/m3·order and 60 kW·h/m3·order for the mineralization.

Solar homogeneous catalysis to the removal of organic matter from slaughterhouse effluents undergone to a prior biological process

“…Regarding the AOP are technologies that generate and use highly oxidizing agents such as hydroxyl radicals (HO • ) and facilitate the degradation of pollutants present in wastewater because these processes are not selective (Escudero et al 2019). The application of AOP such as Fenton and photo-Fenton processes turn out be interesting in the treatment of wastewater difficult to treat via conventional methods.…”