Electrodeposition of FeCoNi thin films for magnetic-MEMS devices

Nanocrystalline soft ferromagnetic Ni–Co–P thin film on Al alloy by low temperature electroless deposition

“…This behavior can be attributed to the increasing of the magnetoelastic anisotropy in the film after stress relief due to the annealing process [30]. The magnetic properties, viz.…”

On the composition depth profile of electrodeposited Fe–Co–Ni alloys

“…Studies on the preparation of pulse-plated Fe-Co-Ni alloys have also been published [18,19]. ED Fe-Co-Ni alloys proved to be ideal magnetic materials in various templated magnetic structures [20][21][22][23] and microelectromechanical devices [24]. In combination with a more noble element, ED Fe-Co-Ni alloys as the magnetic layer in magnetic/non-magnetic multilayer structures were also produced for giant magnetoresistance studies [25][26][27][28].…”

Electrochemical synthesis of magnetic nanowires with controlled geometry and magnetic anisotropy

“…Potentiostatic, galvanostatic, and alternating current (AC) electrodeposition methods have proved suitable for the fabrication of FeCoNi nanowire arrays via the template-assisted method. As Fe, Ni, and Co crystallize into BCC, FCC, and HCP structures, the crystalline structure shown by electrodeposited FeCoNi depends strongly on the composition, and in many cases a mixture of crystalline phases is observed (Myung and Nobe, 2001;Kim et al, 2003;Yoo et al, 2006;Liu et al, 2011;Rafailovic et al, 2012).…”