Eliminating Ferroelectric Hysteresis in All-Two-Dimensional Gate-Stack Negative-Capacitance Transistors

Abstract

Boltzmann distribution thermal tails of carriers restrain the subthreshold swing (SS) of field-effect transistors (FETs) to be lower than 60 mV/decade at room temperature, which restrains the reduction of operate-voltage and power consumption of transistors. The negative-capacitance FET (NC FET) is expected to break through this physical limit and obtain a steep SS by amplifying the gate voltage through the negative capacitance effect of the ferroelectric thin film, providing a new way to further reduce the power consumption of the transistor at the end of Moore’s law. Here, we show a MoS2 NC FET with a CuInP2S6 ferroelectric, exhibiting a large on/off ratio of 108, a steep SS as low as 6 mV/decade, and a wide sub-60 mV/decade drain current range of more than 4 orders of magnitude while sacrificially inducing a huge hysteresis larger than 500 mV. Furthermore, we found that by inserting the h-phase boron nitride (h-BN) layer with suitable thickness, the dielectric capacitance matches the ferroelectric negative capacitance better, and thus the hysteresis on the transfer curve is reduced, and the ideal switching-behavior transistors with SS as low as 62 mV/decade and only 5 mV negligible hysteresis were obtained. Our work demonstrates that under the capacitance–matching condition, the hysteresis-free negative-capacitance transistors do not act as the predicted steep-slope transistors, but their voltage-saving still occurs instead as a type of effective transconductance booster with more than 20 times transconductance amplification.