Enhancement of corrosion protection of low nickel austenitic stainless steel by electroactive polyimide-CuO composites coating in chloride environment

Abstract

Purpose The purpose of this study is to improve the anticorrosion performance of low nickel stainless steel (AISI 201) in 3.5% NaCl by electroactive polyimide/copper oxide (EPI/CuO) composites coating. Design/methodology/approach Electroactive polyimide/copper oxide (EPI/CuO) composites were prepared by oxidative coupling polymerization followed by thermal imidization method. Findings The functional and structural properties of composites were characterized by X-ray diffraction, Fourier transmission infra-red and ultra violet-visible spectroscopy and the surface topography was characterized by field emission scanning electron microscope analysis and anticorrosion performance in 3.5 Wt.% NaCl was evaluated by electrochemical techniques. The obtained results of electrochemical techniques measurement indicated that the composites coated samples give better corrosion protection against attacking electrolyte. Originality/value The ever-increasing price of nickel (Ni) is driving the industries to use low-Ni austenitic stainless steels (ASSs). However, it exhibits relatively poor corrosion resistance as compared with conventional Cr-Ni ASSs. Nonetheless, its corrosion resistance can be enhanced by polymeric (electroactive polyimide [EPI]) coating. CuO particles exhibit the hydrophobic properties and can be used as inorganic filler to incorporate in EPI to further enhance the corrosion protection. The present research paper is beneficial for industries to use low-cost AISI 201, enhance its corrosion resistance and replace the use of costly conventional Cr-Ni ASSs.

Investigation on intergranular corrosion susceptibility of a nitrogen-containing austenitic stainless steel QN2109 by optimized DL-EPR tests

“…Austenitic stainless steels have been widely used because of the comprehensive mechanical and corrosion properties (Duan et al , 2022; Zhu et al , 2022). Because the cost of Ni continues rising worldwide in recent years (Lo et al , 2009), the austenitic stainless steels developed by using N instead of Ni have become an important technical routine (Cheng et al , 2021; Jiang et al , 2020; Lang et al , 2015; Malav et al , 2019; Shukla et al , 2021; Tandon et al , 2019; Zhang et al , 2018). Nitrogen has many advantages.…”

Production, structural and corrosion protection study of electroactive polyamide/alumina nanocomposites

“…It is well known that the different methods such as cathodic protection, corrosion inhibitors and surface coating improve the corrosion property of metallic materials. Polymer and its composite coatings are often applied on the metal surface due to their simple preparation, good processability and low cost to minimize the corrosion by forming a film between the metal and corrosive environment [1][2][3].…”