Enhancement of pin‐bearing behavior of pultruded FRP profiles by multi‐directional fiber architecture design

Abstract

The low resistance of bolted joints in pultruded unidirectional (UD) fiber‐reinforced polymer (FRP) profiles limits the load grade of truss bridges due to shear damage along UD fibers. To address this issue, this study proposes multi‐directional (MD) fiber architecture in FRP profiles to improve the ultimate bearing strength of bolted joints. The digital image correlation shows that the addition of off‐axis fibers in MD FRP profiles prevents shear failure in the UD FRP profile. As a result, the ultimate bearing strengths of MD FRP profiles are enhanced attributed to “off‐axis fiber tie action”. Micro‐computed tomography shows that fiber damage in MD FRP profiles emerged from outer plies, including fiber breakage in 90° and ±45° fibers and fiber kinking in 0° and ±45° fibers. The off‐axis fibers break due to tension when resisting the bearing load in MD FRP profiles. The fiber kinking indicated strength contribution from 0° to ±45° fibers. The fiber breakage and fiber kinking in each ply are dominant in bearing failure instead of delamination, which increases the bearing strength of the pultruded MD FRP profiles. These findings facilitate controlling damage evolution in the pultruded MD FRP profiles and designing high‐resistance bolted joints.Highlights Multi‐directional fibers improved bearing strengths of FRP profiles by 28.5%–33%. Off‐axis fibers bent under pin‐bearing, forming a tie action until breakage. Fiber breakage and kinking in each ply contributed to the bearing failure. Strain localization and redistribution were observed using DIC.