Enhancement of Tribological Properties of Cubic and Hexagonal Boron Nitride Nanoparticles Impregnated on Bearing Steel via Vacuum Heat Treatment Method

Abstract

In the current world of coatings and nanomaterials, specifically bearings, zinc, chromium, nickel, diamond-like coatings, and molybdenum disulfide are being used, to name but a few. Boron nitride in various forms has been used to enhance the surface properties, such as hardness, wear resistance, and corrosion resistance of dies, tools, etc. In this paper, a significant focus is being given to the improvement of the surface properties of bearing-steel materials by the impregnation of cubic and hexagonal boron nitride nanoparticles. The vacuum heat treatment method is used for treating the sample pins of material equivalents to EN31. In the design of the experiments, the Taguchi method with L27 orthogonal array is used for the optimization of various parameters, such as the weight % of c-BN and h-BN nanoparticles and the temperature of the vacuum treatment. With the help of preliminary experimentation, the three levels of three parameters are decided. The microhardness analysis shows an improvement from 321 HV0.1 to 766 HV0.1 for a 50 µm case depth of nanoparticle impregnation. The evaluation of the influence of selected factors is also performed using ANOVA and the S/N ratio, and it was revealed that hex boron nitride (h-BN) affects the microhardness value more than the other two factors. The friction and wear testing reveal that the wear properties are improved by approximately 1.6 times, and the frictional force also decreases by approx. 1.4 times. Scanning electron microscope (SEM) analysis shows that the nanoparticles are penetrated by 21.09% and 46.99% atomic weight. In addition, a reduction in the friction coefficient and better wear response were achieved as a result of the heat treatment with nanoparticle impregnation.