Enhancement of water barrier properties and tribological performance of hybrid glass fiber/epoxy composites with inclusions of carbon and silica nanoparticles

Abstract

Water barrier properties and tribological performance (hardness and wear behavior) of new hybrid nanocomposites under dry and wet conditions were investigated. The new fabricated hybrid nanocomposite laminates consist of epoxy reinforced with woven and nonwoven tissue glass fibers and two different types of nanoparticles, silica (SiO 2 ) and carbon black nanoparticles (C). These nanoparticles were incorporated into epoxy resin as a single nanoparticle (either SiO 2 or C) or combining SiO 2 and C nanoparticles simultaneously with different weight fractions. The results showed that addition of carbon nanoparticles with 0.5 and 1 wt% resulted in maximum reduction in water uptake by 28.55% and 21.66%, respectively, as compared with neat glass fiber reinforced epoxy composites. Addition of all studied types and contents of nanoparticles improves hardness in dry and wet conditions over unfilled fiber composites. Under dry conditions, maximum reduction of 47.26% in weight loss was obtained with specimens containing 1 wt% carbon nanoparticles; however, in wet conditions, weight loss was reduced by 17.525% for specimens containing 0.5 wt% carbon nanoparticles as compared with unfilled fiber composites. Diffusion coefficients for different types of the hybrid nanocomposites were computed using Fickian and Langmuir models of diffusion.

Surface topographical studies of glass fiber reinforced epoxy-ZnO nanocomposites

“…fib mat and W fill are the weight fraction of fiber, matrix, and nanofiller, , matrix, and nanofiller respectively. Experimental density (with voids) of fabricated composites is obtained from equation (3)[26].…”

Improving tribological properties of phenolic resin/carbon fiber composites using m‐Si3N4@PANI core–shell particles

“…To solve the problems of single performance and the application limitations of traditional friction materials, different types of materials have been combined into fabricate composite materials with enhanced performance. For instance, metal‐based friction composites, ceramic‐enhanced friction composites, and fiber‐enhanced friction composites have been developed. Among the fiber composites, carbon fiber friction composites possess the advantages of high dimensional stability, high strength, good wear resistance, high heat resistance, and good thermal conductivity .…”

A novel polystyrene/epoxy ultra‐fine hybrid fabric by electrospinning

“…Epoxy resins are considered as one of the most important classes of thermosetting polymers. They are used extensively in protective coatings and structural applications including fiber reinforced composites, electrical laminates, casting, encapsulation, tooling, and adhesives, because of its outstanding mechanical, thermal, and electrical properties . There are varying grades of epoxies with varying levels of performance to meet different application needs.…”

“…They are used extensively in protective coatings and structural applications including fiber reinforced composites, electrical laminates, casting, encapsulation, tooling, and adhesives, because of its outstanding mechanical, thermal, and electrical properties. 38,39 There are varying grades of epoxies with varying levels of performance to meet different application needs. They can be formulated with other materials or can be mixed with other epoxies to meet a specific performance need.…”