Enhancing Performance and Stability of p-i-n Perovskite Solar Cells with Ag–Cu Codeposited Alloy Electrodes

Abstract

In the development of back electrodes for perovskite solar cells (PSCs), the major challenges are stability and cost. To address this, we present an innovative approach: Simultaneous evaporation of two independently controlled sources of metal materials was performed to achieve a uniform distribution of the alloy electrodes. In this study, Ag−Cu alloys (the molar ratio of Ag/Cu is 7/3) with a highindex crystal face (111) and a work function matching perovskite were prepared using a codeposition technique. These properties mitigate nonradiative carrier recombination at the interface and reduce the energy barrier for carrier migration. Consequently, compared to Ag based PSCs (22.77%), the implementation of Ag−Cu alloy (Ag/Cu is 7/3)-based PSCs resulted in a power conversion efficiency of 23.72%. In a 1500 h tracking test in ambient air, the Ag−Cu alloy (Ag/Cu is 7/3)-based PSCs maintained their initial efficiency of 86%. This can be attributed to almost no migration of elements from the Ag−Cu alloy electrode to the perovskite layer. Our work presents a vital strategy for improving the stability of PSCs and reducing the costs associated with the back electrode in PSCs.