Enhancing the Production of Eco-Friendly Silk Fabrics through the Application of Nonthermal Plasma Wettability Techniques

Abstract

The combination of the effects of nonthermal plasma using atmospheric pressure of plasma jet and the photocatalytic effects of titanium dioxide nanoparticles was used to study the plasma flow modes, electrical characteristics, nonthermal characteristics, antimicrobial measurements, and surface modifications. Using different wettabilities of argon discharges in a laminar flow: (i) wet I, wettability with 2.4 slm argon mixture with oxygen ratio O 2 , equivalent to 15 mslm (Ar/O 2 ), and (ii) wet II, wettability (Ar/O 2 ) mixture combined with titanium dioxide, to accelerate the inactivation process on the nonwoven fabric surface. For wet 0, wet I, and wet II discharges, the average rate of heat transfer to the nonwoven silk fabric increased significantly. Specifically, it goes from 104.6 to 118.6 and then to 241.7 mW, respectively. The kinetic deactivation rate of Escherichia coli increases starting at 0.20, then going up to 0.32, and finally reaching 0.57 min −1 . The increased wettability of the TiO 2 photocatalyst results in an enhanced bactericidal rate, which is caused by both the heat impact from the nonthermal jet and potentially photocatalytic disinfection, leading to the generation of active species. The mechanical parameters owing to different wettabilities and plasma interactions with the fabric membrane were tested for the treated samples, such as stiffness, ultimate yield strength, tensile strength, strain, hardening, elongation, resilience, and toughness.