Epitaxial lift-off of electrodeposited single-crystal gold foils for flexible electronics

Abstract

We introduce a simple and inexpensive procedure for epitaxial lift-off of wafer-size flexible and transparent foils of single-crystal gold using silicon as a template. Lateral electrochemical undergrowth of a sacrificial SiO layer was achieved by photoelectrochemically oxidizing silicon under light irradiation. A 28-nanometer-thick gold foil with a sheet resistance of 7 ohms per square showed only a 4% increase in resistance after 4000 bending cycles. A flexible organic light-emitting diode based on tris(bipyridyl)ruthenium(II) that was spin-coated on a foil exploited the transmittance and flexibility of the gold foil. Cuprous oxide as an inorganic semiconductor that was epitaxially electrodeposited onto the gold foils exhibited a diode quality factor of 1.6 (where = 1.0 for an ideal diode), compared with a value of 3.1 for a polycrystalline deposit. Zinc oxide nanowires electrodeposited epitaxially on a gold foil also showed flexibility, with the nanowires intact up to 500 bending cycles.

Programmable Atom Equivalents: Atomic Crystallization as a Framework for Synthesizing Nanoparticle Superlattices

“…Behavior at a substrate surface represents an active area of research in both atomic and PAE systems due to the unique properties that arise from interfacial interactions, as well as potential applications that thin film materials enable . In this regard, a number of studies have explored the thermodynamics and kinetics of PAE adsorption to a functionalized surface.…”

On‐Demand Preparation of α‐Phase‐Dominated Tungsten Films for Highly Qualified Thermal Reflectors

“…For miniaturization of functional devices and flourishing development of nano‐optics, nanometal thin films serving as a typical building block play more and more important roles in boosting performances . For example, with ultrasmooth surface morphology, excellent stability, superior densification, and good adhesion to substrates, Al‐doped silver films have significantly improved efficiency of solar cells, photothermal conversion coatings, optical waveguide structures, and electromagnetic metamaterials .…”

Micro Grating Deposition on Non‐Planar Surfaces by Polymer‐Assisted Transfer Printing

“…However, transferring techniques have relatively long history and are well developed from late 1980s to nowadays . Especially, in the past years transfer print techniques have improved rapidly . Many of these techniques have provided a pathway to scientific and technological breakthroughs, including creating large‐area metamaterials, transferring crystalline gold films, stacking micro‐structures and depositing diodes on desired surfaces .…”

“…Especially, in the past years transfer print techniques have improved rapidly . Many of these techniques have provided a pathway to scientific and technological breakthroughs, including creating large‐area metamaterials, transferring crystalline gold films, stacking micro‐structures and depositing diodes on desired surfaces . Since transfer print technology can be used in various experimental studies and since it provides a powerful tool for many applications, this indicates that there is a need to develop this technology further.…”