Equilibrium and Kinetic Studies of a Cationic Dye Adsorption Onto Raw Clay

Abstract

In this study, methylene blue (MB) dye adsorption from the aqueous solution on raw clay samples collected from the Tilkitepe in the east of Lake Van was presented. Batch adsorption studies were conducted to evaluate the effect of various experimental parameters such as pH, contact time and initial concentrations on the removal of MB. The five nonlinear adsorption equations were applied to describe the equilibrium isotherms. Considering the correlation coefficients, the order of the most suitable isotherm models was Sips> Freundlich> Temkin> Dubinin-Radushkevich>Langmuir. From the data applied to the pseudo-first-second order, Elovich and intra-particle diffusion kinetic models, it can be said that the best model describing the kinetics of MB dye adsorption is the pseudo-second order (PSO) kinetic model. The results are shown that Tilkitepe / Van raw clay material could be used as an economical and effective adsorbent for dye removal.

Co(II) Adsorption onto Ferrous Chloride and Thermally Modified Diatomite: Surface Properties and Adsorption Mechanism

“…Modification methods are used, such as modification with transition metals, heat treatment, treatment with acids or bases, and organosilane. This leads to more attractive surfaces for adsorption [18], [19].…”

Nonlinear Fitting for Estimation of Adsorption Equilibrium, Kinetic and Thermodynamic Parameters of Methylene Blue onto Activated Carbon

“…Adsorption is considered one of the best techniques used to remove dye from a solution due to its high efficiency, effectiveness, and low cost (15). In this regard, well-known adsorbents, such as activated carbon (16), biomass (17) zeolite, clay materials (18), and polymers (19), are used to remove the contaminating dyes. The adsorption is classified based on the adsorbate-adsorbent interaction and the heat associated with the process.…”