Essays with an Attitude

Lithium-sulfur (Li-S) batteries could potentially revolutionize the rechargeable battery market due to their high energy density and low cost. However, low active material utilization, electrode volumetric expansion and a high rate of capacity fade due to the dissolution of lithium polysulfide intermediates in the liquid electrolyte are the main challenges facing further Li-S battery development. Here, we enhanced Li-S batteries active material utilization and decreased the volumetric expansion by using the lithium/dissolved polysulfide configuration. Moreover, a novel class of cathode materials, Titanium Nitride (TiN), was developed for polysulfide conversion reactions. The surface chemical environment of the TiN has been investigated by X-ray photoelectron spectroscopy (XPS) analysis. The existence of S-TiN bonding at the cathode electrode surface was observed, which indicates the strong interactions between TiN and polysulfides. Therefore, the TiN electrode retains the sulfur species on the cathode surface, minimizing the active material and surface area loss and consequently, improves the capacity retention. The resultant cells demonstrated a high initial capacity of 1,524 mAh g-1 and a good capacity retention for 100 cycles at a C/10 current rate.

show abstract

“…Crystallite size was calculated to be 16 nm from broadening of the diffraction peak using Scherrer's equation [38]. (Fig.…”

Section: Characterization and Electrochemical Measurementsmentioning

confidence: 99%