Exhaust emissions from vessels have increasingly attracted attention in the continuously growing marine transport world trade market. The International Maritime Organization (IMO) has introduced a number of measures designed to reduce exhaust emissions from global shipping. As one of the busiest ports in the world, Qingdao port has been studied to propose possible support to the development of efficient emission reduction. In this study, a large amount data of emissions inventory in Qingdao port was used to predict its annual exhaust emissions, and hence, to help understand maritime pollution in Qingdao port. Bigdata analysis methodology was employed to perform accurate predictions on vessel emissions. The analysis results show that the emissions were dominated by container ships, oil tankers, and bulk cargo ships. The comparison between Qingdao port and other ports in emission control areas demonstrates the necessity of control measures for exhaust emissions. The adoption of shore power and efficient cargo handling seems to be a potential solution to reduce exhaust emissions. The findings of this study are meaningful for maritime safety administration to understand the current emission situation in Qingdao port, propose corresponding control measures, and perform pollution prevention.Symmetry 2018, 10, 452 2 of 11 technical data for regional ships and national sea transport, and the establishment of new specific fuel consumption (SFC) figures and emission factors for ship engines in general.Currently, the activity-based method has been applied for emission prediction in vessels [8]. Jalkanen et al. [9] computed the exhaust emissions of marine traffic in the Baltic Sea area based on the relationship of the instantaneous speed to the design speed, and the detailed technical information of the engines of the ships. An in-port ship activity-based methodology was applied by Tzannatos [10] for maneuvering and berthing of coastal passenger ships and cruise ships calling at the passenger port of Piraeus (Greece), in order to estimate the emission of the main ship exhaust pollutants (NO X , SO 2 , and PM 2.5 ) over a twelve-month period in 2008 and 2009. Shipping emissions in Candarli Gulf, Turkey, were calculated based on the energy consumptions of ships for every different stage which was called operation modes (cruising, maneuvering and hotelling), and detailed real-time activity data were used for calculations of shipping emissions in this study [11]. To estimate the exhaust emission from ocean-going vessels in Hong Kong, Yau et al. [12] collected complete data sets of ship activities, including arrival, departure, and activities during shifts between berths within the Hong Kong territory. The operational modes, including cruising, slow cruising in reduced speed zones, maneuvering and hotelling, were categorized based on the vessel speeds. Another Automatic Identification System (AIS) based emission inventory in Tianjin Port using a bottom-up approach was developed in 2016 [13]. The inter-monthly emission variations ...