Estimation of transient surge energy transferred with associated time delays for individual components of surge protector circuits

Abstract

Modern semiconductor technology is vulnerable to transient surges such as lightning. Transient voltage suppressor systems (TVSSs), which are installed to protect modern electronics, use non-linear components such as varistors and transient voltage suppressor diodes in their design. In the case of low-voltage (1000 V and less) AC power circuits, there is no clear approach to estimate the energy absorption and associated time delays in individual components in relation to the propagated transient surge. Numerical simulation techniques can be used to analyse the phenomenon of surge propagation within a TVSS and estimate the energy transferred to each component with associated time delays. Suitable mathematical models must be used for the non-linear components. This study presents the development of reasonably accurate models for the non-linear circuit elements and formulation of state equations for the TVSS, together with simulation results; results are experimentally validated using a lightning surge simulator. The method of analysing surge propagation presented here could be extended to analyse the phenomenon of surge propagation within power conversion stages which buffer the complex electronic circuits and the power source. The results discussed here indicate that the theoretical energy calculations are within 10% of the experimental results for the individual circuit elements.

Permeance based model for the coupled-inductor utilized in the supercapacitor assisted surge absorber (SCASA) and its experimental validation

“…4 must be replaced with appropriate "ON resistances" (R ON ). According to the varistor model [17] of V20E275 (UltraMOV Series-Littlefuse) utilized in SCASA circuit, ON resistances of both Var1 and Var2 is about 7.5 Ω [18].…”

Mitigation of transient overvoltages in microgrid including PV arrays

“…R P is an inner equivalent parallel resistance usually in the order of several kilo-ohms and decides the leakage current when the supercapacitor is in a standby mode [36,39].…”

Mitigation of switching overvoltages in microgrids based on SVC and supercapacitor

“…R P is an inner equivalent parallel resistance usually in the order of several kilo-ohms and decides the leakage current when the proposed SC is in a standby mode [33,35].…”