EUV-induced hydrogen plasma: pulsed mode operation and confinement in scanner

Abstract

In recent years, EUV lithography scanner systems have entered high-volume manufacturing for state-of-the-art integrated circuits, with critical dimensions down to 10 nm. This technology uses 13.5-nm EUV radiation, which is shaped and transmitted through a near-vacuum H 2 background gas. This gas is excited into a low-density H 2 plasma by the EUV radiation, as generated in pulsed mode operation by the laser-produced plasma in the EUV source. Thus, in the confinement created by the walls and mirrors within the scanner system, a reductive plasma environment is created that must be understood in detail to maximize mirror transmission over the lifetime and to minimize molecular and particle contamination in the scanner. In addition to the irradiated mirrors, reticle, and wafer, the plasma and radical load to the surrounding construction materials also must be considered. We provide an overview of the EUV-induced plasma in the scanner context. Special attention is given to the plasma parameters in a confined geometry, such as that found in the scanner area near the reticle. It is shown that plasma confinement and resulting contributions from secondary electron emission delay the formation of the plasma sheath and thereby reduce the peak ion energies to below the sputtering threshold for mirrors and construction materials. Furthermore, for a confined pulsed plasma with a pulse period shorter than the decay time of the plasma, the plasma consists of a quasi-steady-state cold background plasma and periodic transient peaks in ion energy and ion flux. In terms of modeling, this means that no assumptions can be made on the electron distribution functions and a (Monte-Carlo) particle-in-cell (PIC) model is needed. We present an extension of the PIC model approach to complex three-dimensional geometries and to multiple pulses using a hybrid PIC-diffusion approach. Also, the translation of these specific plasma parameters to off-line setups and the aspects that must be included to make a meaningful translation from off-line laboratory EUV setups to the scanner plasma are discussed. © The Authors. Published by SPIE under a Creative Commons Attribution 4.0 Unported License. Distribution or reproduction of this work in whole or in part requires full attribution of the original publication, including its DOI.

EUV pellicle scanner integration for N2 nodes and beyond

“…For the CNT pellicle the concept of film thickness is less meaningful and it becomes more appropriate to specify the film in terms of carbon density (expressed in 'TFU' (Thin Film Unit, or 10 15 C-atoms per cm 2 ). The pellicle is irradiated by EUV and around the pellicle an EUV-induced hydrogen plasma is formed; so mechanical, thermal, chemical and radiation stability need to be evaluated under these conditions 16 . These considerations favor metal silicides for today's source powers of up to 400 W, and this is the baseline pellicle material used today 17 .…”

Evaluation of Ta-Co alloys as novel high-k EUV mask absorber

“…An additional pristine sample was kept aside to be used as a reference. In a EUV scanner operation, the mask is exposed in a hydrogen environment to maintain self-cleaning conditions for the sensitive EUV mirrors [13]. To test its stability, Ta-Co alloy samples were exposed to hydrogen radicals for 24 hours.…”

A study of hydrogen plasma-induced charging effect in EUV lithography systems

“…The interactions between the charges and neutral atoms determine the dynamics of the plasma, including its temperature, density, and spectra [8][9][10][11][12][13]. In the commercial EUV lithography scanner [14][15][16][17], the EUV-induced hydrogen plasma needs to be investigated to understand its effect on the reliability and yield of the Si chips [18,19].…”