Evaluation of Abrasive WearRate and Machining Behaviors of Synthesized Nitinol Composite

Abstract

The present investigation deals with wear and machining behaviors of manufacture nitinol composite through Vacuum Induction Melting (VIM). The major composition of nickel and titanium was reinforced with tungsten carbide (WC). Scanning Electron Microscopy (SEM) was employed to investigate the morphology of the synthesized nitinol composite. For investigating the topography of the surface of the nitinol composite was analyzed by scanning force microscopy or atomic force microscopy. Spark erosion machining has been applied to explore the machining behavior of the nitinol composite. Abrasive Wear Rate (AWR) is evaluated by using abrasion tester. Machining and wear parameters are optimized by applying taguchi approach. The contribution and the effect of input constraints on the responses are investigated by analysis of variance.Optimal abrasive wear rate was attained at 900 rpm of disc speed, 12 gm/min of abrasive flow rate and 400m of sliding distance. Disc speed was a dominant factor and it has developed 43.86% effect on abrasive wear rate. Optimal rate of metal removal was achieved at 45A of current, 200µs of pulse on time and 35V of Volts. The current was the leadingfactor and it has produced 86.38% effect on the rate of metal removal.