Evaluation of nanostructured Nd0.7Co0.3FeO3 perovskite obtained via hydrothermal method as anode material for Li-ion battery

Tailored HoFeO 3 –Ho 2 O 3 hybrid perovskite nanocomposites as stable anode material for advanced lithium‐ion storage

“…The specific discharge capacity for LaFeO 3 was relatively unstable and lower than that of the result reported in this study (331 mAh g −1 /after 200 cycles at 0.2 A g −1 vs 787 mAh g −1 /after 100 cycles at 0.1 A g −1 ). Similarly, Nd 0.7 Co 0.3 FeO 3 perovskite nanostructures displayed a reversible initial capacity of ~295 mAh g −1 at 0.5 A g −1 ; however, the capacity fastly faded after nearly 40 cycles 14 . Therefore, compared to other perovskites such as LaFeO 3 and Nd 0.7 Co 0.3 FeO 3 materials, the HoFeO 3 –Ho 2 O 3 composite electrode showed better electrochemical performances resulting from the unique structural and morphological features.…”

“…For instance, Hu et al, developed lanthanum‐based perovskite nanofibers as electrode material for supercapacitors and anode material for LIB through combined electrospinning and high‐temperature calcination method, in which a reversible specific capacity of 331 mAh g −1 was recorded at current density of 0.2 A g −1 for LaFeO 3 13 . In addition, Ogunniran et al evaluated the application of Nd 0.7 Co 0.3 FeO 3 perovskite nanostructures as anode materials for LIBs, in which a reversible capacity of 260 mAh g −1 was displayed after 100 cycles at 0.5 A g −1 14 . On the other hand, LaFeO 3 perovskite microspheres were also prepared through hydrothermal method combined with annealing and etching approaches for gas‐sensing applications 15 .…”

“…13 In addition, Ogunniran et al evaluated the application of Nd 0.7 Co 0.3 FeO 3 perovskite nanostructures as anode materials for LIBs, in which a reversible capacity of 260 mAh g À1 was displayed after 100 cycles at 0.5 A g À1 . 14 On the other hand, LaFeO 3 perovskite microspheres were also prepared through hydrothermal method combined with annealing and etching approaches for gas-sensing applications. 15 Interestingly, the same LaFeO 3 perovskite nanocrystalline material synthesized through sol-gel method was used as catalyst for water splitting as well.…”

Recent Advances in Perovskite Catalysts for Efficient Overall Water Splitting

“…The co-precipitation method could also be used to synthesize well-defined perovskites such as Sr 2 MIrO 6 (M = Fe, Co), which is explored as an excellent OER catalyst in acidic media [72]. Hydrothermal synthesis acts as one of the most attractive techniques for fabricating perovskites with various morphologies such as nanosheets [79], rod-like perovskites [80], nanoflakes [81], cubic perovskites [82], and nanoparticles [83]. However, the formation of perovskite oxides from hydrothermal synthesis usually involves subsequent annealing treatment, which requires a relatively high temperature.…”

Effect of annealing temperature and cadmium doping on structure and magnetic properties of neodymium orthoferrite nanoparticles synthesized by a simple co-precipitation method

“…The shift of the absorbance of the material from the UV region to the Vis region along with the reduction of band gap energy gives the La, Pr and Sm-doped NdFeO 3 materials great potential in the application as photocatalysts under sunlight [17,18]. Doped NdFeO 3 orthoferrite materials have been synthesized by several methods, such as solid state reaction [13,14,16,19], microwave assisted [21], hydrothermal [2,22,23], co-precipitation using surfactants [24], and sol-gel or gel combustion with the addition of various polymers [15,25,26]. In previous studies [27][28][29][30][31], the authors successfully synthesized LnFeO 3 nanoparticles (Ln = Y, Nd, Pr, Ho) with several doping elements, such as Sr, Co, Ca and Ni by simple co-precipitation via the hydrolysis of cations in hot water (≥ 95 °C) and precipitation at room temperature (without any surfactant).…”