Evaluation of Pb (II) Removal by Tea Pulp Modified with Magnetite Nanoparticle

Abstract

Tea waste was used to successfully synthesize magnetic nanoparticles (TWMNPs). In this investigation, Pb (II) was eliminated by tea waste modified with magnetite nanoparticles (TWMNPs) was investigated. To prepare the TWMNPs, FeCl3.6H2O was dissolved in double distilled water (DDW) and 20 g of pulp tea was added slowly and stirred, after 30 min TWMNPs adsorbent were separated through an external magnetic field and washed three times with double distilled water (DDW) and ethanol then dried at 60°C. The FESEM test of TWMNPs shows the particle size in the range of 15–20 nm and spherical/cuboid-shaped crystal structure of Fe3O4 (magnetite). X-ray analysis showed that the main XRD diffraction peaks of TWMNPs are related to Fe3O4, HighScore plus X’Pert software was used to identify the phase in this sample. The specific surface area of the prepared magnetite nanoparticles was 25.2 m2.g−1. The pore volume, maximum pore radius, and VSM of TWMNPs were 14.4 cm3.g−1, 2.3 nm, and 3.37–2.41, respectively. The effects of various parameters, such as contact time, pH, concentration, and adsorbent dosage, were studied. The experimental isotherm data were analyzed using the Langmuir and Freundlich models, and it was found that the removal process followed the Langmuir isotherm and the maximum adsorption capacity calculated by Langmuir fitting was 10.67 mg.g−1. In addition, the adsorption kinetics followed the first-order kinetic model and the value of rate constant was found to be 14.04 × 10−2 min−1. The results showed that increasing the pH level led to a rise in the response level and Pb (II) removal. Also, the trend in Pb (II) removal and response level had an increase with increasing the initial concentration of Pb (II). Increasing contact time from 5 to 20 minutes has a slight effect on Pb (II) removal. Considering the results, TWMNPs could lead to suitable results for the removal of Pb (II) from wastewater containing this metal. And the maximum adsorption capacity was found to be 10.67 mg.g−1.