Evaluation of the corrosion resistance of Ni–Co–B coatings in simulated PEMFC environment

Gamboa, S.A.; González-Rodrı́guez, J.G.; Valenzuela, Edgar; Campillo, B.; Sebastian, P.J.; Reyes‐Rojas, A.

doi:10.1016/j.electacta.2005.11.021

Cited by 54 publications

(22 citation statements)

References 17 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…This may rationalize the different corrosion behaviour of carbon steel, AA6061 and SS304 alloys coated with NieCoeB during their evaluation in simulated proton exchange membrane fuel cells [18]. 3.…”

Section: Potentiostatic Polarization Tests Of Niecoep Coated Aluminummentioning

confidence: 96%

“…Aluminum alloys such as AA6061 [18], AA1050 [19], Al 5052 [20] and Al 5083 [21] coated with different deposits were also investigated. These coatings involved electroless deposited NieMoeP [20] and electrodeposited NieCoeB [18], NieFeeCo, NieMoeFe and NieMoeFeeCr [19]. Ternary NieCoeP alloy has been extensively prepared either by electroless [22e27] or electroplating [28e30] deposition techniques.…”

Section: Introductionmentioning

confidence: 99%

See 1 more Smart Citation

Study of different aluminum alloy substrates coated with Ni–Co–P as metallic bipolar plates for PEM fuel cell applications

Fetohi

Hameed

El–Khatib

et al. 2012

International Journal of Hydrogen Energy

View full text Add to dashboard Cite

Section: Potentiostatic Polarization Tests Of Niecoep Coated Aluminummentioning

confidence: 96%

Section: Introductionmentioning

confidence: 99%

Study of different aluminum alloy substrates coated with Ni–Co–P as metallic bipolar plates for PEM fuel cell applications

Fetohi

Hameed

El–Khatib

et al. 2012

International Journal of Hydrogen Energy

View full text Add to dashboard Cite

“…A complimentary proposal would be that the oxidized form of the electroactive polymer leads to the oxidation of Fe, thereby maintaining a protective oxide layer on the Fe. The corrosion process in neutral solutions is presented in the following equations [27,35] and in schematic diagrams (Fig. 8(c)); anodic reaction:…”

Section: Investigation Of Crs Surfacementioning

confidence: 99%

Advanced environmentally friendly coatings prepared from amine-capped aniline trimer-based waterborne electroactive polyurethane

Huang

Lin

et al. 2013

Materials Chemistry and Physics

View full text Add to dashboard Cite

“…Kumar and Reddy [8] proposed Ni-Cr metal foam as an alternative material for the bipolar plate. Due to the chemical instability of the metals in the fuel cell environments, corrosion of metal bipolar plates has been discussed by various researchers [9][10][11]. Composite materials were also investigated extensively for bipolar plate application, and Wu and Shaw studied functional improvement of polymer bipolar plates by adding nanotubes [12].…”

Section: Introductionmentioning

confidence: 99%

Effect of Moisture and Temperature on Mechanical Properties of Graphite Composite Bipolar Plate for Proton Exchange Membrane Fuel Cell (PEMFC)

Kim

Heesup

et al. 2011

Advanced Composite Materials

View full text Add to dashboard Cite

The fuel cell is considered to be a promising alternative energy source for the near future. A bipolar plate, which is the major component of the fuel cell, is always exposed to the moisture during operation, because one of the important functions of the bipolar plate is to facilitate water management within the cell. In order to use graphite composite materials as bipolar plate material for PEMFC, the effect of the moisture environment on the mechanical properties of bipolar plate is studied. Two types of specimens, one made of particulate graphite 90%-epoxy 10% composite 'with' woven carbon fabric, and the other 'without' carbon fabric, were fabricated. Both types of specimens were kept in three different environmental conditions: (1) dry at room temperature, (2) immersed in 85 • C water for 100 h, and (3) immersed in 85 • C water for 300 h. A series of experiments were performed with the samples of the two types: water absorption rate, strength and modulus from the bending and tensile tests were measured. The results showed that a steep increase of water absorption rate occurred at the beginning of the test followed by a slow increase afterwards. Total water absorption rate was lower for the specimens with fabric since the inserted carbon fabric has lower porosity and lower water absorption than the specimens without fabric made of graphite/epoxy composite. Bending strength and modulus decreased for both types of specimens. However, addition of carbon fabrics to the graphite-particle/epoxy composite increased the tensile strength significantly.

show abstract

Evaluation of the corrosion resistance of Ni–Co–B coatings in simulated PEMFC environment

Cited by 54 publications

References 17 publications

Study of different aluminum alloy substrates coated with Ni–Co–P as metallic bipolar plates for PEM fuel cell applications

Study of different aluminum alloy substrates coated with Ni–Co–P as metallic bipolar plates for PEM fuel cell applications

Advanced environmentally friendly coatings prepared from amine-capped aniline trimer-based waterborne electroactive polyurethane

Effect of Moisture and Temperature on Mechanical Properties of Graphite Composite Bipolar Plate for Proton Exchange Membrane Fuel Cell (PEMFC)

Contact Info

Product

Resources

About