Evolution and investigation of copper and gold ball bonds in extended reliability stressing

Abstract

This paper discusses the microstructure evolution of copper (Cu) and gold (Au) ball bonds after various extended reliability stresses such as biased highly accelerated temperature and humidity test (HAST), unbiased highly accelerated temperature and humidity test (UHAST), temperature cycling (TC), and high temperature storage life (HTSL) in BGA package. Objective of this study is to study the microstructure evolution and changes after long hours and long cycles of component reliability stressing and its predicted failure mechanisms and to determine the long-term reliability comparison with combination of bonding wires in HAST, UHAST, and TC. Secondary electron microscopy (SEM) and energy dispersive X-ray (EDX) have been carried out to understand the respective microstructure of failed samples in HAST, UHAST, TC, and HTSL long-term reliability failures. Respective failure mechanisms of copper and gold ball bonds carrion under HAST and UHAST, ball bond lifting in TC and HTSL have been analyzed and proposed. The evolution of surface morphology, including copper and gold ball bond micro cracking, gold ball bond Kirkendall microvoiding and intermetallic compound (IMC) formation, was studied in FBGA package with copper and gold ball bonds during various reliability stresses. Biased HAST, UHAST, TC, and HTSL mechanisms were proposed to explain the observed morphological changes and the resulting ball bond wear out modes after extended reliability stresses. Weibull reliability analyses have been established to compare the performance of copper and gold ball bonds under humid and dry environmental tests.

Copper Wire Bonding: A Review

“…The reliability of the wire bond interface in electronic packaging primarily depends on the microstructure and thickness of IMCs formed between the chip pad and the bonding interface [ 51 ]. Extensive research has been conducted by scholars on the influence of IMCs on the reliability of Cu wire bonding.…”

A Review of Silver Wire Bonding Techniques

“…Bonding reliability is closely related to the composition, morphology and properties of intermetallic compounds (IMC). The reliability of the wire bonding interface in electronic packaging mainly depends on the microstructure and thickness of the IMC formed between the chip liner and the bonding interface [81]. The evolution of the structure and properties of the IMC at the interface after the bonding of the silver-based bonding wire has been one of the most concerning issues in the industry [82].…”

Inversion for Thermal Properties with Frequency Domain Thermoreflectance

“…Commonly, this integration occurs through the use of thermocompression bonding of metallic interconnects that can range from tens to hundreds of microns in diameter . These techniques can add residual stress to the system that can impact reliability, and fatigue over time from power cycling the devices can lead to thermomechanical and electrical failures. − Data used to screen for manufacturing defects or to characterize the bond quality over time are critically important, as these data can both (a) indicate whether manufacturing processes are of sufficiently high quality and (b) help evaluate physical changes that may occur after the assembly is in use.…”