Evolution of hot corrosion resistance of conventional CSZ and MoSi2 self-healing thermal barrier coatings in Na2SO4+V2O5 at 950 °C

Soltani, P.; Keyvani, A.; Bahamirian, M.

doi:10.1016/j.ceramint.2021.12.087

Cited by 7 publications

(2 citation statements)

References 40 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Despite this, as far as the authors are aware, there have been no comprehensive studies investigating the impacts of MAC composite layers on atmospheric plasma sprayed (APS) coatings' oxidation behaviour. The stability of MoSi 2 -self-healing TBC was compared to the conventional CSZ using a hot corrosion test in our previous research [39]. Hence, this study is dedicated to the impacts of functionally graded composite layers reinforced with self-healing MoSi 2 compound on the oxidation behaviour of MCrAlY bond coats.…”

Section: Introductionmentioning

confidence: 99%

“…Hence, this study is dedicated to the impacts of functionally graded composite layers reinforced with self-healing MoSi 2 compound on the oxidation behaviour of MCrAlY bond coats. 3 ) and Al 2 O 3 powder (37.5 wt.%, d Al2O3 = 3.9 g/cm 3 ) were mixed at a rotation speed of 150 rpm for 6 h in a ball mill uisng an alumina cup and balls to create a homogenous composite [39].…”

Section: Introductionmentioning

confidence: 99%

See 1 more Smart Citation

High-Temperature Cyclic Oxidation of Single and Dual-Layer CSZ: ZrO2-25 wt% CeO2-2.5 wt% Y2O3/MAC: MoSi2 + Al2O3 + CSZ Self-healing TBCs at 1100 °C

Keyvani,

Soltani,

Bahamirian

2023

High Temperature Corrosion of mater.

View full text Add to dashboard Cite

Cyclic oxidation in thermal barrier coatings (TBCs) based on ZrO 2 with MoSi 2 + Al 2 O 3 has gained increasing attention. The present study the atmospheric plasma spray (APS) process was used for applying a new dual-layer TBC (CSZ: ZrO 2 -25 wt.% CeO 2 -2.5 wt.% Y 2 O 3 / MAC: MoSi 2 + Al 2 O 3 + CSZ) with enhanced oxidation resistance compared to the single-layer CSZ. CSZ/MAC and CSZ TBCs on NiCrAlY (bond coat) to nickel-based superalloy (IN738LC). The self-healing effects of the MAC overlayer were studied at 720°C for 5 and 10 h. The high-temperature cyclic oxidation tests were performed at 1100°C for 4 h in each cycle in an air-electric furnace and the samples were cooled during each cycle in the furnace. The role of MAC over layer in the improvement of the oxidation behaviour of CSZ was investigated through eld emission scanning electron microscopy (FE-SEM/EDS), and X-ray diffraction (XRD) analyses. The coating was healed during the oxidation process due to the reaction of healing particles (MoSi 2 ) on the surface of the sample with oxygen through the cracks at temperatures above 720°C. The MAC coatings showed improved oxygen diffusion resistance due to the lling and sealing effect. Thus, there is a low partial pressure of oxygen at the interface of BC-CSZ in the CSZ/MAC samples than in the CSZ samples. The low partial pressure of oxygen resulted in a slow growth rate of TGO, resulting in the improved oxidation and spallation resistance of the CSZ/MAC coatings. The results showed the higher oxidation resistance of dual-layer CSZ/MAC compared to the single-layer CSZ coating. Results of the study indicate that the MAC layer over the CSZ layer increased the coatings' oxidation resistance for extended periods by preventing oxygen in ltration into the CSZ layer.

show abstract

Section: Introductionmentioning

confidence: 99%

Section: Introductionmentioning

confidence: 99%