Excellent field–trapping properties of large ring–shaped REBCO melt–textured bulks fabricated by the single–direction melt growth (SDMG) method

Abstract

Ring-shaped homogeneous YBCO and DyBCO bulks were successfully fabricated using the Single-Direction Melt Growth (SDMG) method. The bulks were directly grown from ring-shaped compacted powder using ring-shaped molds with an outer diameter of 50 mm and inner diameters of 15, 20, and 25 mm. The ring-shaped bulks exhibited high trapped fields inside the rings up to 1.2 T at 77 K. Analyses of trapped field distributions revealed uniform current density distributions along the orbital direction. Stacked ring bulks demonstrated even higher trapped fields, reaching 2.0 T at 77 K. It was confirmed for the stacked bulks that time-independent uniform trapped fields can be achieved by magnetizing at lower fields than fully magnetizing conditions. Observed paramagnetic magnetization of the SDMG-processed YBCO bulk was negligibly small below the detection limit, which is considered to be more suitable for bulk NMR/MRI applications than DyBCO. Additionally, we proposed a method to quantitatively evaluate trapped fields of superconducting bulks with various diameters and thicknesses, where the estimated average current densities from the maximum trapped fields for all the obtained ring-shaped bulks were above 104 A/cm2 at 77 K. These results indicate that SDMG is an effective method for fabricating high-quality, large-scale ring-shaped bulks with superior field-trapping properties.