Excess enthalpy of the system propan-1-ol+MTBE+i-octane. Experimental results and ERAS model calculations

Thermodynamics of biofuels: Excess enthalpies for binary mixtures involving ethyl 1,1-dimethylethyl ether and hydrocarbons at different temperatures using a new flow calorimeter

“…Its uncertainty is similar to the commercial isothermal flow calorimeter that already exists. Moreover the systems {methyl 1,1-dimethylethyl ether (MTBE) + heptane} and {methyl 1,1-dimethylethyl ether (MTBE) + 1-propanol} were measured at T = 298.15 K and compared with the literature values [10][11][12][13][14][15]. For both systems, the best results, the least values of standard deviations and maximum deviations were obtained in our measurements.…”

“…15 [17], the deviation for the excess molar enthalpy is around 0.9%. The system (ETBE + heptane) show a higher deviation of the maximum in comparison with the literature value [18] around a 3%.…”

“…In this paper, excess molar enthalpies for five binary mixtures at T = (298. 15 and 313.15) K are reported and a new flow calorimeter is presented.…”

Excess enthalpies of binary and ternary mixtures containing tert-amyl methyl ether (TAME), tert-amyl alcohol (TAOH) and hexane at 298.15 and 313.15 K

“…(c) MTBE (1) + heptane (2), (᭺) this work; (+) Tusel-Langer et al [15]; (ᮀ) Tong et al [14]. (d) MTBE (1) + 1-propanol (2), (᭺) this work; (+) Zhu et al [18]; ( ) Bich et al [17]; (ᮀ) Nagata and Tamura [16].…”

“…Comparison of these results are presented for the systems MTBE (1) + heptane (2) [14,15] and MTBE (1) + 1-propanol (2) [16][17][18] at 298.15 K. (2), (᭺) this work; (+) Lundberg [12]; (᭛) Savini et al [13]; (ᮀ) Ewing et al [11]. (c) MTBE (1) + heptane (2), (᭺) this work; (+) Tusel-Langer et al [15]; (ᮀ) Tong et al [14].…”