Exergetic and Thermoeconomic Analyses of Solar Air Heating Processes Using a Parabolic Trough Collector

Abstract

This paper presents a theoretical and practical analysis of the application of the thermoeconomic method. A furnace for heating air is evaluated using the methodology. The furnace works with solar energy, received from a parabolic trough collector and with electricity supplied by an electric power utility. The methodology evaluates the process by the first and second law of thermodynamics as the first step then the cost analysis is applied for getting the thermoeconomic cost. For this study, the climatic conditions of the city of Queretaro (Mexico) are considered. Two periods were taken into account: from July 2006 to June 2007 and on 6 January 2011. The prototype, located at CICATA-IPN, Qro, was analyzed in two different scenarios i.e., with 100% of electricity and 100% of solar energy. The results showed that thermoeconomic costs for the heating process with electricity, inside the chamber, are less than those using solar heating. This may be ascribed to the high cost of the materials, fittings, and manufacturing of the solar equipment. Also, the influence of the mass flow, aperture area, length and diameter of the receiver of the solar prototype is a parameter for increasing the efficiency of the prototype in addition to the price of manufacturing. The optimum design parameters are: length is 3 to 5 m, mass flow rate is 0.03 kg/s, diameter of the receiver is around 10 to 30 mm and aperture area is 3 m 2 . OPEN ACCESSEntropy 2014, 16 4613

Application of Thermoeconomics in HVAC Systems

“…Irreversibility is related to the consumption of natural resources and, therefore, to the cost of the products obtained. Despite its interesting meaning, exergy analysis application in building energy supply systems is relatively new and there are still many methodological aspects to solve; nevertheless, different applications of exergy have come up and some of them are found in references [15][16][17]. Furthermore, the name low-ex buildings is now used to designate low-energy consumption buildings, as state references [18,19].…”

Exergy Analysis of a Ground-Coupled Heat Pump Heating System with Different Terminals

“…For a general steady-state and steady flow process, the exergy balance equations are applied to find the exergy loss of each subsystem [19]. Exergy efficiencies often give more revealing insights into process performance than energy efficiencies, and can provide a measure of potential for improvement [20]. The exergy efficiency of each subsystem is defined as the ratio of exergy product rate to exergy input rate [3].…”

Exergoeconomic optimization and sensitivity analysis of a commercial parabolic trough collector for the climate of Tehran, Iran

“…Heat losses from parabolic trough solar collectors investigated by the thermal and thermodynamic analysis of a PTC were performed in different modes of concentration ratio and rim angle, by Mwesigye et al The exergy analysis of the PTC receiver was proposed by Padilla et al Their main parameters were the inlet temperature, mass flow rate, wind speed, and the intensity of the sun's radiation. Hernández‐Román et al conducted the exergy and thermo‐economic analyses of an air heater system in the PTC process. In 2015, the technical‐economic evaluation of a Kalina cycle for the PTC was proposed by Ashouri et al They examined the performance of the system, including a PTC, a storage tank, an auxiliary heater, and Kalina cycle, throughout the year in thermodynamic and economic terms.…”