Experimental analysis and parametric optimization of drilling process for ferrous clay composite using GRA-PCA approach

Bhosale, Shrikrushna B.; Bhowmik, Sumit; Ray, Amitava

doi:10.1016/j.jmrt.2020.12.032

Cited by 10 publications

(7 citation statements)

References 29 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…The no peaks were observed at no clay condition. This shows the homogeneous distribution of clay in ferrous clay composite [30].…”

Section: X-ray Diffraction (Xrd)mentioning

confidence: 67%

“…The increased Al and Si percentages have been noticed in the EDS analysis of 5% clay as shown in Fig. 4 (b) where it has observed as 8.05% and 19.93% respectively [30].…”

Section: Analysis Of Microstructurementioning

confidence: 77%

“…The sintering procedure was completed in controlled N2/H2 (90:10) environment at 1200ºC temperature for an hour and a half. The sintered specimens were used for mechanical characterization purpose [30][31].…”

Section: Specimen Preparationmentioning

confidence: 99%

“…The density of ferrous alloy and bentonite clay has taken 7.87 g/cc and 0.961 g/cc respectively. Also, the experimental density of ferrous clay composite has been measured using density meter [30]. The porosity has measured experimentally using image analysis system and calculated theoretically by using Eq.…”

Section: Porosity and Density Measurementmentioning

confidence: 99%

See 3 more Smart Citations

An influence of Nano particles of bentonite clay on mechanical properties of ferrous clay composite through additive manufacturing route

Bhosale¹,

Bhowmik²,

Ray³

2022

Preprint

Self Cite

View full text Add to dashboard Cite

The powder metallurgy (P/M) components have been extensively used in industrial applications and P/M components properties has been influenced by alloying elements and porosity. In the present work, the bentonite clay (aluminum silicate) as porosity filler has been mixed in the ferrous alloy for manufacturing of low porosity P/M components. The specimens have been manufactured by using iron-carbon-copper and iron-carbon-copper-nickel- molybdenum with bentonite clay. The bentonite clay has varied with wt. % of 1–5% at the interval of 1%. To recognize the effect of bentonite clay, the mechanical properties such as density and porosity have measured and the crushing strength, and hardness test has carried out. Also, microstructure analysis has been carried out by optical microstructure study and scanning electron microscopy (SEM). Further the X-ray diffraction (XRD) and Energy Dispersive Spectrometry (EDS) analysis has been carried out for clay particles location and homogeneous mixing. The micro-structure and chemical composition analysis shows that the clay remains at grain boundary. The test results shows that the porosity has significantly reduced while, slightly reduction has been found in density, hardness and crushing strength with an increase in wt. % of clay. This analysis show that the 1% of Nano-particles of bentonite clay is helpful as porosity fillers with acceptable mechanical properties.

show abstract

“…The no peaks were observed at no clay condition. This shows the homogeneous distribution of clay in ferrous clay composite [30].…”

Section: X-ray Diffraction (Xrd)mentioning

confidence: 67%

“…The increased Al and Si percentages have been noticed in the EDS analysis of 5% clay as shown in Fig. 4 (b) where it has observed as 8.05% and 19.93% respectively [30].…”

Section: Analysis Of Microstructurementioning

confidence: 77%

Section: Specimen Preparationmentioning

confidence: 99%

Section: Porosity and Density Measurementmentioning

confidence: 99%

See 2 more Smart Citations

An influence of Nano particles of bentonite clay on mechanical properties of ferrous clay composite through additive manufacturing route

Bhosale¹,

Bhowmik²,

Ray³

2022

Preprint

Self Cite

View full text Add to dashboard Cite

show abstract

“…Viswanathan et al [18], Umamaheswarrao et al [19], Ananthakumar et al [20] have also applied it to optimize the cutting conditions in turning. Also, other researchers have utilized this approach to optimize the operating parameters in distinct machining processes like drilling and milling [21][22][23].…”

Section: Introductionmentioning

confidence: 99%

RSM Modelling, and Multi-Object Optimization of Turning Parameters for Polyamide (PA66) Using PCA and PCA Coupled with TOPSIS

Boucherit

ZAIDI

Yallese

et al. 2022

mech

View full text Add to dashboard Cite

In this study, turning operations on polyamide PA66 with cemented carbide insert, were organized according to the L27 Taguchi design whose objective is the analysis of the cutting parameters on the output parameters (Surface roughness and cutting force), as well as on the calculated parameter (material removal rate (Q)). The results revealed that surface roughness is highly impacted by the feed rate, which accounts for more than 68% of the variance, followed by the cutting speed and finally the depth of cut. With respect to cutting force, depth of cut and feed rate have emerged as the most important terms.A mathematical model is then created to predict the surface roughness and cutting force. Finally, the optimal cutting regime leading to good surface quality with less cutting force and maximum productivity was examinedusing two multi criteria optimization methods namely PCA and PCA coupled with TOPSIS. The total desirability function was used as a decision criterion for evaluating the two optimization methods. The results demonstrate the potential superiority of the PCA-TOPSIS method over the PCA method.

show abstract

Optimization Problems

Mahalle¹,

P.²,

Sakhare³

et al. 2023

Studies in Autonomic, Data-Driven and Industrial Computing

View full text Add to dashboard Cite

Experimental analysis and parametric optimization of drilling process for ferrous clay composite using GRA-PCA approach

Cited by 10 publications

References 29 publications

An influence of Nano particles of bentonite clay on mechanical properties of ferrous clay composite through additive manufacturing route

An influence of Nano particles of bentonite clay on mechanical properties of ferrous clay composite through additive manufacturing route

RSM Modelling, and Multi-Object Optimization of Turning Parameters for Polyamide (PA66) Using PCA and PCA Coupled with TOPSIS

Optimization Problems

Contact Info

Product

Resources

About