Experimental and Simulation Study of the Optical Performances of a Wide Grid Polarizer as a Luminance Enhancement Film for LCD Backlight Applications

Abstract

Reflective polarizers can be used as luminance enhancement films for LCD backlights via the polarization recycling process. The optical performances of a wire grid polarizer (WGP) as a reflective polarizer adopted in edge-lit backlights were investigated by luminance evaluation and a time-domain simulation technique. The results were compared to those of a commercial dielectric multilayer film. The luminance gain factor of WGP was smaller than that of the multilayer film by 18%. This was attributed to a much larger internal loss of WGP due to light absorption by metal wires. The internal losses of both reflective polarizers and the polarization conversion efficiency of the backlight were obtained numerically based on a phenomenological model. The optical performances of WGP were optimized by using a time-domain simulation technique. The luminance gain increased and was found to become comparable to, but slightly less than the case of the dielectric multilayer film with decreasing line width.

Simulation Study of Injection-Molded Light Guide Plates for Improving Luminance Uniformity Based on the Measured Replication Quality of Micro-Patterns for LED TV Backlight

“…Successful development of efficient backlight units has made it possible to expand the application of liquid crystal displays (LCD) to various fields including mobile devices and large-size TVs [1][2][3][4][5][6][7][8][9][10][11]. The light guide plate (LGP) is the most important optical component in the edge-lit backlight for LCD applications.…”

Fiber-based Diffuser Sheet for Liquid Crystal Display Backlight Unit

“…[1]. In the field of LCDs, many researchers have been making strong efforts to develop backlight units (BLUs) with good optical properties, namely, high luminance, good luminance uniformity, and a wide viewing angle [2][3][4][5]. In the BLUs, a diffuser sheet that can provide uniform brightness by spreading the light is a key component.…”

Simulation Study on the Minimization of Moiré Patterns Caused by Microlens Array Films for Backlight Applications

“…For example, backlights for liquid crystal displays usually adopt one or two MLA films, in addition to prism films and/or a reflective polarizer, to achieve low power consumption [2][3]. In general, MLA films consist of randomly positioned hemispherical lenses, the filling factor of which is in the range of 65-70%.…”